Heading 39.02

EU TARIC

Polymers of propylene or of other olefins, in primary forms

4 subheadings · 18 TARIC codes

3902.10Polypropylene, in primary forms2 codes
Code / DescriptionThird-Country Duty
3902.10.00.20Polypropylene, containing no plasticiser, -|of a melting point of more than 150|°C (as determined by the ASTM D 3417|method), -|of a heat of fusion of 15|J/g or more but not more than 70|J/g, -|of an elongation at break of 1|000|% or more (as determined by the ASTM D 638|method), -|of a tensile modulus of 69|MPa or more but not more than 379|MPa (as determined by the ASTM D 638|method)
6.50 %
3902.10.00.90Other
6.50 %
3902.20Polyisobutylene, elastomeric, in primary forms2 codes
Code / DescriptionThird-Country Duty
3902.20.00.20Hydrogenated polyisobutene, in liquid form
6.50 %
3902.20.00.90Other
6.50 %
3902.30Propylene copolymers, in primary forms6 codes
Code / DescriptionThird-Country Duty
3902.30.00.10For cavity filling, for use in certain types of aircraft
6.50 %
3902.30.00.20Hydrogenated block copolymer of styrene and isoprene (CAS RN 68648-89-5), containing by weight less than 37 % of styrene
6.50 %
3902.30.00.30Hydrogenated copolymer of styrene, isoprene and butadiene, containing by weight 28 % or more, but not more than 55 % of propylene
6.50 %
3902.30.00.95A-B-A block copolymer, consisting of: -|a copolymer of propylene and ethylene and -|21|% (± 3|%) by weight of polystyrene
6.50 %
3902.30.00.97Liquid ethylene-propylene-copolymer with: -|a flashpoint of 250|°C or more, -|a viscosity index of 150|or more, -|of a number average molecular weight (M@n) of 650|or more
6.50 %
3902.30.00.99Other
6.50 %
3902.90Polymers of propylene or of other olefins, nesoi, in primary forms8 codes
Code / DescriptionThird-Country Duty
3902.90.10.00A-B-A block copolymer of polystyrene, ethylene-butylene copolymer and polystyrene, containing by weight 35|% or less of styrene, in one of the forms mentioned in note|6(b) to this chapter
0.00 %
3902.90.20.00Polybut-1-ene, a copolymer of but-1-ene with ethylene containing by weight 10|% or less of ethylene, or a blend of polybut-1-ene with polyethylene and/or polypropylene containing by weight 10|% or less of polyethylene and/or 25|% or less of polypropylene, in one of the forms mentioned in note|6(b) to this chapter
0.00 %
3902.90.90.10For cavity filling, for use in certain types of aircraft
6.50 %
3902.90.90.60Non-hydrogenated 100|% aliphatic resin (polymer), with|the following characteristics: -|liquid at room temperature -|obtained by cationic polymerisation of C-5|alkenes monomers -|with a number average molecular weight (Mn) of 370|(±|50) -|with a weight average molecular weight (Mw) of 500|(±|100)
6.50 %
3902.90.90.65Brominated butadiene-styrene copolymer (CAS RN 1195978-93-8) with a bromine content of 60 % by weight or more but not more than 68 %, in forms as defined in Note 6 (b) to Chapter 39
6.50 %
3902.90.90.70Synthetic poly-alpha-olefin with a viscosity of 3 or more but not more than 9 centistokes (measured at 100 ° Celsius according to the ASTM D 445 method), obtained by polymerization of dodecene with or without: -not more than 40 % by weight of tetradecene and/or -not more than 2 % by weight decene and/or -not more than 2 % by weight of hexadecene
6.50 %
3902.90.90.94Chlorinated polyolefins, whether or not in a solution or dispersion
6.50 %
3902.90.90.99Other
6.50 %

Source: EU TARIC database (European Commission). For informational purposes only. Consult the official TARIC and a licensed customs broker for binding rates.