Subheading 3919.90
EU TARICSelf-adhesive plates, sheets, other flat shapes, of plastics, light-reflecting surface produced by glass grains, nesoi
23 TARIC codes
| TARIC Code | Description | Third-Country Duty |
|---|---|---|
| 3919.90.20.00 | Self-adhesive circular polishing pads of a kind used for the manufacture of semiconductor wafers | 0.00 % |
| 3919.90.80.10 | For use in certain types of aircraft | 6.50 % |
| 3919.90.80.20 | Polyester film: -|coated on one side|with an acrylic thermal release adhesive that debonds at temperatures of|90|°C or more but not more than|200|°C, and a polyester liner, and -|on the other side not coated or coated with an acrylic pressure sensitive adhesive or with an acrylic thermal release adhesive that debonds at temperatures of|90|°C or more but not more than| 200|°C, and a polyester liner | 6.50 % |
| 3919.90.80.23 | Film consisting of 1|to 3|laminated layers of poly(ethylene terephthalate) and a copolymer of terephthalic acid, sebacic acid and ethylene glycol, coated on one side with an acrylic abrasion resistant coating and on the other side with an acrylic pressure sensitive adhesive, a water soluble methylcellulose coating and a poly(ethylene terephthalate) protective liner | 6.50 % |
| 3919.90.80.24 | Reflecting laminated sheet: -|consisting of an epoxy acrylate layer embossed on one side in a regular shaped pattern, -|covered on both sides with one or more layers of plastic material and -|covered on one side with an adhesive layer and a release sheet | 6.50 % |
| 3919.90.80.30 | Reflecting sheet: -|of a polycarbonate or acrylic polymer film embossed on one side in a regular shaped pattern -|covered on one or both sides with one or more layers of plastic or metallisation, and -|whether or not covered on one side with a self-adhesive layer and a release sheet | 6.50 % |
| 3919.90.80.31 | Reflecting film, consisting of a layer of polyurethane, with, on one side, security imprints against counterfeiting, alteration or substitution of data or duplication, or an official mark for an intended use, and embedded glass beads and, on the other side, an adhesive layer, covered on one side or on both sides with a release film | 6.50 % |
| 3919.90.80.33 | Transparent poly(ethylene) self-adhesive film, free from impurities or faults, coated on one side with an acrylic pressure sensitive adhesive, with a thickness of 60|μm or more, but not more than 70|μm, and with a width of more than 1|245|mm but not more than 1|255|mm | 6.50 % |
| 3919.90.80.45 | Reinforced polyethylene foam tape, coated on both sides with an acrylic micro channelled pressure sensitive adhesive and on one side a liner, with an application thickness of 0,38|mm or more but not more than 1,53|mm | 6.50 % |
| 3919.90.80.48 | Polytetrafluoroethylene film, -with a thickness of 50 µm or more, -with a width of 6,30 mm or more but not more than 740 mm, -an elongation at break of not more than 200 %, and -coated on one side with a pressure sensitive silicone adhesive with a thickness of not more than 50 µm | 6.50 % |
| 3919.90.80.49 | Reflecting laminated sheet consisting of a film of poly(methyl methacrylate) embossed on one side in a regular shaped pattern, a film of a polymer containing glass microspheres, an adhesive layer and a release sheet | 6.50 % |
| 3919.90.80.50 | Self-adhesive reflecting sheet whether or not in segmented pieces, -|whether or not containing a watermark, -|with or without an application tape coated on one side with an adhesive; the reflective sheet consists of: -|a layer of acrylic or vinyl polymer, -|a layer of poly(methyl methacrylate)| or| polycarbonate containing microprisms, -|a layer of metallisation, -|an adhesive layer, and -|a release sheet -|whether or not containing an additional layer of polyester | 6.50 % |
| 3919.90.80.51 | Biaxially-oriented film of poly(methyl methacrylate), of a thickness of 50μm or more but not exceeding 90μm, covered on one side with an adhesive layer and a release sheet | 6.50 % |
| 3919.90.80.53 | Acrylic foam tape: - covered on one side with a heat activatable adhesive or an acrylic pressure sensitive adhesive, - covered on the other side with an acrylic pressure sensitive adhesive, - covered on one or both sides with a release sheet, - with a peel adhesion of more than 25 N/cm (at an angle of 90° as determined by the ASTM D 3330 method) | 6.50 % |
| 3919.90.80.54 | Poly(vinyl chloride) film, on one side covered with - a polymer layer - an adhesive layer - a release liner, on one side embossed, containing oblate spheres; whether or not on the other side covered with an adhesive layer and a metallised polymer layer | 6.50 % |
| 3919.90.80.55 | Black polyvinyl chloride film: -with a gloss of more than 25 degrees according to ASTM D 2457, -whether or not covered on one side with a protective film of polyethylene terephthalate and on the other side with a micro-structured pressure sensitive acrylic adhesive and a release liner for use in the manufacture of die-cut films for interior and exterior surfaces of cars | 6.50 % |
| 3919.90.80.56 | Transparent polyethylene film coated on one side with an aqueous acrylic adhesive, of a thickness of 30 μm to 50 μm, put up in rolls of a width of 52 cm or more but not more than 154 cm | 6.50 % |
| 3919.90.80.65 | Self-adhesive film with a thickness of 40 µm or more, but not more than 475 µm, consisting of one or more layers of transparent, metallized or dyed poly(ethylene terephthalate), covered on one side with a scratch resistant coating and on the other side with a pressure sensitive adhesive and a release liner | 6.50 % |
| 3919.90.80.70 | Self-adhesive polishing discs of microporous polyurethane, whether or not|coated with a|pad | 6.50 % |
| 3919.90.80.80 | Self adhesive reflecting film, consisting of several layers including: -|a copolymer of acrylic resin, -|polyurethane,| -|a metalised layer with, on one side, laser imprints against counterfeiting, alteration or substitution of data or duplications, or an official mark for an intended use, -|glass microspheres, and -|an adhesive layer, with a release liner on one or both sides | 6.50 % |
| 3919.90.80.82 | Reflecting film consisting of: -|a polyurethane layer, -|a glass microspheres layer, -|a metallised aluminium layer, and -|an adhesive, covered on one or both sides with a release liner, -|whether or not a poly(vinyl chloride) layer, -|a layer whether or not incorporating security imprints against counterfeiting, alteration or substitution of data or duplication, or an official mark for an intended use | 6.50 % |
| 3919.90.80.83 | Reflector or diffuser sheets, in rolls, -for protection against ultraviolet or infra-red heat radiation, to be affixed to windows or -for equal transmission and distribution of light, intended for LCD modules | 6.50 % |
| 3919.90.80.99 | Other | 6.50 % |
Source: EU TARIC database (European Commission). For informational purposes only. Consult the official TARIC and a licensed customs broker for binding rates.