Heading 70.09

EU TARIC

Glass mirrors, whether or not framed, including rear-view mirrors

3 subheadings · 8 TARIC codes

7009.10Glass rearview mirrors for vehicles4 codes

Code / DescriptionThird-Country Duty

7009.10.00.30Layered glass with mechanical dimming ability by different angles of incident light comprising: -|whether or not a layer of chrome, -|a break-resistance adhesive tape or hot-melt adhesive, and -|a release film on the front side and protective paper at the back side, of a kind used for interior rear-view mirrors of vehicles

7009.10.00.50Unfinished electro-cromic auto-dimming|mirror |for motor vehicle rear-view mirrors: -|whether or not equipped with plastic backing plate, -|whether or not equipped with a heating element, -|whether or not equipped with Blind Spot Module (BSM) display

7009.10.00.60Electrochromic self-dimming inside rear-view mirror: -with a mirror support -in a plastic casing and -with an integrated circuit, -whether or not with a high beam assistant, -whether or not with a digital compass, -whether or not with a garage door opener, -whether or not with an integrated toll module, -whether or not with a camera for driver and/or cabin monitoring, -whether or not with an infrared filter, for use in the manufacture of motor vehicles of Chapter 87

7009.10.00.90Other

7009.91Glass mirrors (o/than rearview mirrors), unframed, n/o 929 cm2 in reflecting area3 codes

Code / DescriptionThird-Country Duty

7009.91.00.10Chrome-plated glass mirror with: -a length of 155 mm or more, but not more than 158 mm, -a height of 115 mm or more, but not more than 120 mm, -a blind spot sensor with a blind spot motion detection light module, with an edge luminescence greater than or equal to 5 000 cd/m² and a central luminescence greater than or equal to 7 000 cd/m², -a heater foil, with a resistance of 1,1 kΩ or more, but not more than 1,35 kΩ, designed to be mounted in a housing as an exterior vehicle mirror, for use in the manufacture of car mirrors

7009.91.00.20Aspherical, convex or flat chrome-plated glass, ready for framing: -with a length of 140 mm or more but not more than 215 mm, -with a height of 104 mm or more but not more than 138 mm, -with curvature radius of 0 mm or more but not more than 1 330 mm, -with a reflectance of more than 40 %, for the manufacture of automotive mirrors

7009.91.00.90Other

7009.92Glass mirrors (o/than rearview mirrors), framed, n/o 929 cm2 in reflecting area1 code

Code / DescriptionThird-Country Duty

7009.92.00.00Framed

Source: EU TARIC database (European Commission). For informational purposes only. Consult the official TARIC and a licensed customs broker for binding rates.