Subheading 7609.00
EU TARICAluminum, fittings for tubes and pipes
6 TARIC codes
| TARIC Code | Description | Third-Country Duty |
|---|---|---|
| 7609.00.00.10 | For use in certain types of aircraft | 5.90 % |
| 7609.00.00.30 | Aluminium connecting block for automotive air conditioning systems: -with a T6 hardening, -equipped with round stubs with a circumferential outer groove, -with through or non-through holes, made of profiles with an upper radius of 8 mm or more but not more than 11 mm, and a lower radius of 12 mm or more but not more than 17 mm, -with a distance between holes of 15 mm or more but not more than 22 mm, -with sockets designed for brazing or clamping, -with mounting holes for M6 or M8 mounting screw, threaded or not, -with a width of 5 mm or more but not more than 16 mm, -for connecting a compressor, a condenser, an evaporator, a chiller and other lines | 5.90 % |
| 7609.00.00.40 | Flame brazed aluminium block for connecting tubes in automotive heat exchangers and/or turbocharged air coolers and/or automatic transmission coolers: -with extruded, bent connection tubes with an outer diameter of 5 mm or more, but not more than 25 mm, -with a weight of 0,02 kg or more, but not more than 0,25 kg, for use in the manufacture of cooling system in vehicles of Chapter 87 | 5.90 % |
| 7609.00.00.50 | Machined aluminium components: -containing by weight 0,55 %, or more but not more than 0,61 % of magnesium, -containing by weight 0,55 %, or more but not more than 0,61 % of silicon, -with a hardening state of T5 or T6, -with a mass of 0,05 kg or more, but not more than 0,2 kg, for use in the manufacture of CO₂ cooling systems in motor vehicles | 5.90 % |
| 7609.00.00.60 | Aluminium connection block: -with a weight of 3 g or more but not more than 400 g, -manufactured from 6061-T6 or 6060-T6 or 6082-T6 aluminium grade, -being an integral part of an air conditioning hose assembly or oil cooling line hose assembly or air brake line hose assembly or water cooling line hose assembly, -with holes (sockets) or splines (pilots) or threads that allow installation in an automotive or other air conditioning system (also understood as installation in the line), -with sockets designed for brazing or fastening, -with at least 1 through-hole with a diameter of 3 mm or more but not more than 25 mm, for the manufacture of automotive cooling and air conditioning systems | 5.90 % |
| 7609.00.00.90 | Other | 5.90 % |
Source: EU TARIC database (European Commission). For informational purposes only. Consult the official TARIC and a licensed customs broker for binding rates.