Heading 84.81
EU TARICTaps, cocks, valves and similar appliances, for pipes, boiler shells, tanks, vats or the like, including pressure-reducing valves and thermostatically controlled valves; parts thereof
6 subheadings · 70 TARIC codes
Code / DescriptionThird-Country Duty
8481.10.05.10For use in certain types of aircraft
2.20 %8481.10.05.90Other
2.20 %8481.10.19.10For use in certain types of aircraft
2.20 %8481.10.19.90Other
2.20 %8481.10.99.10For use in certain types of aircraft
2.20 %8481.10.99.40Pressure reducing valves in a brass case with: -a length of not more than 30 mm (± 1 mm), -a width of not more than 18 mm (± 1 mm), of a kind used for incorporation in fuel delivery modules of motor vehicles
2.20 %8481.10.99.90Other
2.20 %Code / DescriptionThird-Country Duty
8481.30.91.20For use in certain types of aircraft
2.20 %8481.30.91.30Mechanical check (non-return) valve for opening and closing of the flow of fuel: -with an operating pressure of not more than 250 MPa, -with a flow rate of 45 cm³/minute or more, but not more than 55 cm³/minute, -with 4 input holes, each of them with a diameter of 1,2 mm or more, but not more than 1,6 mm, -made of steel
2.20 %8481.30.91.91Steel check (non-return) valves with:
-|an opening pressure of not more than 800|kPa
-|an external diameter not more than 37|mm
2.20 %8481.30.91.99Other
2.20 %8481.30.99.20For use in certain types of aircraft
2.20 %8481.30.99.50Mechanical check (non-return) valve for opening and closing of the flow of fuel: -with an operating pressure of not more than 250 MPa, -with a flow rate of 45 cm³/minute or more, but not more than 55 cm³/minute, -with 4 input holes, each of them with a diameter of 1,2 mm or more, but not more than 1,6 mm, -made of steel
2.20 %8481.30.99.90Other
2.20 %Code / DescriptionThird-Country Duty
8481.80.11.10For use in certain types of aircraft
2.20 %8481.80.11.90Other
2.20 %8481.80.19.10For use in certain types of aircraft
2.20 %8481.80.19.90Other
2.20 %8481.80.31.00Thermostatic valves
2.20 %8481.80.39.00Other
2.20 %8481.80.40.10For use in certain types of aircraft
2.20 %8481.80.40.90Other
2.20 %8481.80.51.00Temperature regulators
2.20 %8481.80.59.20Pressure regulating|valve for incorporation into|compressors of motor vehicle air condition|units
2.20 %8481.80.59.30Two-way flow control valve with housing, with: - at least 5, but not more than 16 outlet holes with at least 0,05 mm, but not more than 0,5 mm diameter, - at least 330 cm³/minute, but not more than 5 000 cm³/minute flow rate, - at least 19, but not more than 300 MPa operating pressure
2.20 %8481.80.59.40Flow-control valve -|made of steel, -|with an outlet hole with a diameter of at least 0,05mm or more, but not more than 0,5|mm, -|with an inlet hole with a diameter of at least 0,1|mm, but not more than 1,3|mm, -|with chromium nitride coating, -|with a surface roughness of Rp 0,4
2.20 %8481.80.59.50Electromagnetic valve for quantity control with -|a plunger, -|a solenoid with a of coil resistance of at least 1,85 Ohm, but not more than 8,2|Ohm
2.20 %8481.80.59.60Electromagnetic valve for quantity control - with a solenoid with a coil resistance of at least 0,19 Ohm, but not more than 0,66 Ohm, and with an inductance of not more than 1 mH
2.20 %8481.80.59.70Flow-control valve -made of steel, -with an outlet hole with a diameter of at least 0,05 mm, but not more than 0,5 mm, -with an inlet hole with a diameter of at least 0,1 mm, but not more than 1,3 mm
2.20 %8481.80.59.80Solenoid valve for combustion engine oil pump to regulate the quantity of oil in the pump:
-with a cable of length of 550 mm or more but not more than 700 mm incorporating an electrical connector,
-with an operating pressure of not more than 5.5 bar,
-with an operating voltage of 9 VDC or more but not more than 16 VDC,
-with a valve's base width of 22 mm or more but not more than 27 mm,
-with a valve's length of 55 mm or more but not more than 110 mm,
for use in the manufacture of motor vehicle engines
2.20 %8481.80.59.90Other
2.20 %8481.80.61.00Of cast iron
2.20 %8481.80.63.50For use in certain types of aircraft
2.20 %8481.80.63.90Other
2.20 %8481.80.69.50For use in certain types of aircraft
2.20 %8481.80.69.60Four-way reversing valve for refrigerants, consisting of:
-|a solenoid pilot valve
-|a brass valve body including valve slider and copper connections
with a working pressure up to 4,5|MPa
2.20 %8481.80.69.99Other
2.20 %8481.80.71.00Of cast iron
2.20 %8481.80.73.10For use in certain types of aircraft
2.20 %8481.80.73.20Pressure- and flow-control valve controlled by external electromagnet: -|made of steel and/or steel alloy(s), -|without integrated circuit, -|of not more than 1000|kPa operating pressure, -|with a flow quantity of not more than 5|l/min, -|without an electromagnet
2.20 %8481.80.73.90Other
2.20 %8481.80.79.10For use in certain types of aircraft
2.20 %8481.80.79.40Service valve which suits for R410A or R32 gas while connecting indoor and outdoor units with:
-a withstanding pressure of the valve body of 6,3 MPa,
-a leakage ratio of less than 1.6 g/a,
-an impurity ratio of less than 1.2 mg/PCS,
-an airtight pressure of the valve body of 4.2 Mpa
for use in the manufacture of air conditioners
2.20 %8481.80.79.90Other
2.20 %8481.80.81.30For use in certain types of aircraft
2.20 %8481.80.81.90Other
2.20 %8481.80.85.30For use in certain types of aircraft
2.20 %8481.80.85.90Other
2.20 %8481.80.87.30For use in certain types of aircraft
2.20 %8481.80.87.90Other
2.20 %8481.80.99.40For use in certain types of aircraft
2.20 %8481.80.99.70Pressure- and flow-control valve controlled by external electromagnet: -|made of steel and/or steel alloy(s), -|without integrated circuit, -|of not more than 1000|kPa operating pressure, -|with a flow quantity of not more than 5|l/min, -|without an electromagnet
2.20 %8481.80.99.80Solenoid valve for combustion engine continuous variable valve timing system to control oil flow as a function of engine speed and load:
-in metal cover,
-with electrical connector,
-with a force of not more than 10 N,
-with an operating voltage of 9 VDC or more but not more than 16 VDC,
-with a length of 80 mm or more but not more than 110 mm,
-with a width of 80 mm or more but not more than 110 mm,
-with a height of 20 mm or more but not more than 30 mm,
for use in the manufacture of engines of motor vehicles
2.20 %8481.80.99.90Other
2.20 %Code / DescriptionThird-Country Duty
8481.90.00.10For use in certain types of aircraft
2.20 %8481.90.00.25Die-cast aluminium housing for electronic throttle control or exhaust gas recirculation systems, comprising the following features:
-high-pressure die-cast aluminium EN AC-46000,
-shot-blasted and machined,
-height of 100 mm or more but not exceeding 135 mm,
-width of 115 mm or more but not exceeding 150 mm,
-weight of 210 g or more but not more than 500 g
2.20 %8481.90.00.40Valve armature: -|for the opening and closing of the flow of fuel, -|consisting of a shaft and a blade, -|with at least 3 but not more than 8 holes on the blade, -|made of metal and/or metal alloy(s)
2.20 %8481.90.00.50Silicone or plastic keyboards, comprising: -parts of common metal, and -whether or not comprising parts of plastic, -epoxy resin reinforced with fiberglass or wood, -whether or not printed or surface-treated, -with or without electrical conductors -with or without a membrane bonded to the keyboard, -with or without mono or multilayer protective film
2.20 %8481.90.00.60Nozzle body for the regulation of angle and distribution of fuel injection: -of a cylindrical shape, -made of stainless steel, -with 4 or more, but not more than 16 holes, -with a flow rate of 100 cm³/minute or more, but not more than 500 cm³/minute
2.20 %8481.90.00.70Nozzle needle for opening and closing the flow of fuel in the engine, with: -2 holes, -4 grooves, -a diameter of 3 mm or more, but not more than 6 mm, -a length of 25 mm or more, but not more than 35 mm, -made of stainless steel with hard-chrome plating
2.20 %8481.90.00.80Flow-control valve -made of steel, -with an outlet hole with a diameter of at least 0,05 mm, but not more than 0,5 mm, -with an inlet hole with a diameter of at least 0,1 mm, but not more than 1,3 mm
2.20 %8481.90.00.90Other
2.20 %Source: EU TARIC database (European Commission). For informational purposes only. Consult the official TARIC and a licensed customs broker for binding rates.