Heading 84.82

EU TARIC

Ball or roller bearings, and parts thereof

8 subheadings · 18 TARIC codes

8482.10Ball bearings with integral shafts3 codes

Code / DescriptionThird-Country Duty

8482.10.10.15Ball bearings with: -an internal diameter of 4 mm or more but not more than 9 mm, -an external diameter of not more than 26 mm, -a width of not more than 8 mm, for use in the manufacture of electromotors with a range of 40 000 rpm or more but not more than 80 000 rpm

8482.10.10.90Other

8482.10.90.00Other

8482.20Tapered roller bearings, including cone and tapered roller assemblies1 code

Code / DescriptionThird-Country Duty

8482.20.00.00Tapered roller bearings, including cone and tapered roller assemblies

8482.30Spherical roller bearings1 code

Code / DescriptionThird-Country Duty

8482.30.00.00Spherical roller bearings

8482.40Needle roller bearings1 code

Code / DescriptionThird-Country Duty

8482.40.00.00Needle roller bearings, including cage and needle roller assemblies

8482.50Cylindrical roller bearings nesoi2 codes

Code / DescriptionThird-Country Duty

8482.50.00.20Axial roller bearing made of steel: -the retainer is made of cold-rolled steel with a carbon content of up to 0,25 percent, complying with standard ASTM A109-98, -the rollers are made of anti-friction steel according to ASTM 295-94, -with an external diameter of 63 mm or more but not more than 66 mm, -with an internal diameter of 44 mm or more but not more than 46 mm, -with a weight of 23 g or more but not more than 27 g, -with 36 rollers or more but not more than 38 rollers

8482.50.00.90Other

8482.80Ball or roller bearings nesoi, including combined ball/roller bearings2 codes

Code / DescriptionThird-Country Duty

8482.80.00.10Connecting components for use in the production of helicopter tail rotor shafts

8482.80.00.90Other

8482.91Balls, needles and rollers for ball or roller bearings3 codes

Code / DescriptionThird-Country Duty

8482.91.10.00Tapered rollers

8482.91.90.10Rollers with a logarithmic profile and a diameter of 25 mm or more but not more than 70 mm or balls with a diameter of 30 mm but not more than 100 mm, - made of 100Cr6 steel or 100CrMnSi6-4 steel (ISO 3290), - with a deviation of 0,5 mm or less as determined with the FBHmethod for use in wind turbine industry

8482.91.90.90Other

8482.99Inner or outer rings or races for ball bearings5 codes

Code / DescriptionThird-Country Duty

8482.99.00.30Brass cages with the following characteristics: – continuously or centrifugally cast, – turned, – containing by weight 35 % or more, but not more than 38 % of zinc, – containing by weight 0,75 % or more, but not more than 1,25 % of lead, – containing by weight 1,0 % or more, but not more than 1,4 % of aluminium, and – with a tensile strength of 415 Pa or more, of a kind used for the manufacture of ball bearings

8482.99.00.60Inner or outer rings made of steel, not hardened or not grinded, outer ring with internal raceway(s), inner ring with external raceway(s), with external diameters of: 14 mm or more but not more than 77 mm for the inner ring, 26 mm or more but not more than 101 mm for the outer ring for use in the manufacture of bearings

8482.99.00.70Male and female parts of cages, - made of flat-rolled steel, - with a diameter of 14,5 mm or more but not more than 420 mm, - the male part including rivets, - the female part including holes, used for manufacturing of deep grove ball bearings

8482.99.00.80Punched cages of various diameters, - made of flat rolled steel, - with tensile strength of 270 MPa or more, for the production of tapered roller bearings

8482.99.00.90Other

Source: EU TARIC database (European Commission). For informational purposes only. Consult the official TARIC and a licensed customs broker for binding rates.