Heading 85.05
EU TARICElectromagnets; permanent magnets and articles intended to become permanent magnets after magnetization; electromagnetic or permanent magnet chucks, clamps and similar holding devices; electromagnetic couplings, clutches and brakes; electromagnetic lifting heads; parts thereof
4 subheadings · 35 TARIC codes
Code / DescriptionThird-Country Duty
8505.11.10.10For use in certain types of aircraft
2.20 %8505.11.10.20Articles, of an alloy of neodymium, in the shape of a rectangle, triangle, square, or trapezoid,
-whether or not arched,
-whether or not with rounded corners or oblique sides,
-whether or not colour marked
-whether or not coated or passivated with a surface treatment,
-whether or not consisting of segments bonded together and electrically insulated from one another
with:
-a length of 9 mm or more, but not more than 105 mm,
-a width of 5 mm or more, but not more than 105 mm,
-a thickness of 2 mm or more, but not more than 55 mm
intended to become permanent magnet after magnetisation
2.20 %8505.11.10.23Bars in the form of arched rectangles, containing alloy containing neodymium, with:
-a length of 15 mm or more but not more than 52 mm,
-a width of 5 mm or more but not more than 42 mm,
-whether or not coated or passivated with a surface treatment,
intended to become permanent magnets after magnetisation
2.20 %8505.11.10.28Articles containing alloy containing neodymium, in the form of rings, tubes, bushings or collars:
-with an external diameter of not more than 45 mm,
-with a height of not more than 45 mm,
-whether or not coated or passivated with a surface treatment,
intended to become permanent magnets after magnetisation
2.20 %8505.11.10.30Permanent magnets of an alloy of neodymium, either in the shape of a rectangle, whether or not rounded, whether or not coated or passivated with a surface treatment, with:
-a rectangular or a trapezoidal cross-section,
-a length of not more than 140 mm,
-a width of not more than 90 mm and
-a thickness of not more than 55 mm,
or in the shape of an arched rectangle with:
-a length of not more than 75 mm,
-a width of not more than 40 mm,
-a thickness of not more than 7 mm and
-a radius of curvature of more than 86 mm but not more than 241 mm,
-layers of nickel and copper
or in the shape of a disc with:
-a diameter of not more than 90 mm,
-whether or not a hole in the centre
2.20 %8505.11.10.35Article of an alloy of neodymium, in the shape of a disc, with:
-a diameter of not more than 90 mm,
-whether or not a hole in the centre,
-layers of copper, nickel and/or zinc,
intended to become permanent magnets after magnetisation
2.20 %8505.11.10.74Articles in shape of flat bars, arched bars, quarter sleeves or trapezoid whether or not arched, rounded corners or oblique sides made of ferrite, or cobalt, or samarium or other rare-earth metals, or their alloy,
- whether or not overmolded with polymers,
- whether or not coated or passivated with a surface treatment,
with:
- a length of 5 mm or more, but not more than 60 mm,
- a width of 5 mm or more, but not more than 40 mm,
- a thickness of 3 mm or more, but not more than 15 mm,
intended to become permanent magnets after magnetisation
2.20 %8505.11.10.75A quarter sleeve intended to become permanent magnet after magnetization, -|consisting of at least neodymium, iron and boron, -|with a width of 9,1|mm or more but not more than| 10,5|mm, -|with a length of 20|mm or more but not more than 30,1|mm, of a kind used on rotors for the manufacture of fuel pumps
2.20 %8505.11.10.76Articles of an alloy of neodymium, or an alloy of samarium,
- whether or not coated or passivated with a surface treatment,
- whether or not covered with zinc,
- in the shape of rectangles,
with:
- a length of 13,8 mm or more but not more than 45,2 mm,
- a width of 7,8 mm or more but not more than 25,2 mm,
- a height of 1,3 mm or more but not more than 4,7 mm,
intended to become permanent magnets after magnetisation
2.20 %8505.11.10.77Article of an alloy of neodymium, in the form of arched rectangles, whether or not coated or passivated with a surface treatment, with:
- a width of 9,1 mm or more but not more than 10,5 mm,
- a length of 20 mm or more but not more than 30,1 mm,
intended to become permanent magnets after magnetization
2.20 %8505.11.10.78Two permanent magnets made of a praseodymium-neodymium alloy, in a rectangular steel holder with an outer casing of rubber with outer dimensions:
-a length of 200 mm or more but not more than 205 mm,
-a width of 58 mm or more but not more than 62 mm,
-a height of 25 mm or more but not more than 30 mm,
with a stud mounted in the middle
2.20 %8505.11.10.99Other
2.20 %8505.11.90.10For use in certain types of aircraft
2.20 %8505.11.90.74Articles in shape of flat bars, arched bars, quarter sleeves or trapezoid whether or not arched, rounded corners or oblique sides made of ferrite, or cobalt, or samarium or other rare-earth metals, or their alloy,
- whether or not overmolded with polymers,
- whether or not coated or passivated with a surface treatment,
with:
- a length of 5 mm or more, but not more than 60 mm,
- a width of 5 mm or more, but not more than 40 mm,
- a thickness of 3 mm or more, but not more than 15 mm,
intended to become permanent magnets after magnetisation
2.20 %8505.11.90.99Other
2.20 %Code / DescriptionThird-Country Duty
8505.19.10.10For use in certain types of aircraft
2.20 %8505.19.10.90Other
2.20 %8505.19.90.10For use in certain types of aircraft
2.20 %8505.19.90.30Articles of agglomerated ferrite in the shape of a disc, whether or not coated or passivated with a surface treatment, with:
- a diameter of not more than 120 mm,
- a hole in the centre,
intended to become permanent magnets after magnetisation with a remanence between 245 mT and 470 mT
2.20 %8505.19.90.45Article of agglomerated ferrite in the shape of a rectangle, whether or not with oblique sides, with:
-a length of 26,85 mm or more but not more than 32,15 mm,
-a width of 7,6 mm or more but not more than 9,55 mm,
-a thickness of 5,3 mm or more but not more than 5,8 mm, and
-a weight of 6,1 g or more but not more than 8,3 g,
intended to become a permanent magnet after magnetisation
2.20 %8505.19.90.60Articles of agglomerated ferrite in the shape of arched rectangles,
- whether or not coated or passivated with a surface treatment,
- whether or not with rounded corners,
with:
- a length of 9 mm or more but not more than 101 mm,
- a width of 9 mm or more but not more than 101 mm,
- a thickness of 1,85 mm or more but not more than 15,15 mm,
intended to become permanent magnets after magnetisation
2.20 %8505.19.90.74Articles in shape of flat bars, arched bars, quarter sleeves or trapezoid whether or not arched, rounded corners or oblique sides made of ferrite, or cobalt, or samarium or other rare-earth metals, or their alloy,
- whether or not overmolded with polymers,
- whether or not coated or passivated with a surface treatment,
with:
- a length of 5 mm or more, but not more than 60 mm,
- a width of 5 mm or more, but not more than 40 mm,
- a thickness of 3 mm or more, but not more than 15 mm,
intended to become permanent magnets after magnetisation
2.20 %8505.19.90.89Other
2.20 %Code / DescriptionThird-Country Duty
8505.20.00.10For use in certain types of aircraft
2.20 %8505.20.00.30Electromagnetic clutch, for use in the manufacture of compressors of air conditioning machines of motor vehicles
2.20 %8505.20.00.40Electromagnetic clutch:
-transmitting torque from the motor shaft to the cutting device pulley,
-containing field coil, rotor, hub and armature,
-with an operating voltage of 12 V
-a current of 3,93 A current or more but not more than 6,86 A,
-a resistance of 1,84 ohm or more but not more than 3,05 ohm (operating at 20 °C),
-a static torque of 108 Nm or more but not more than 305 Nm
for use in the manufacture of rider type self-propelled mowers
2.20 %8505.20.00.90Other
2.20 %Code / DescriptionThird-Country Duty
8505.90.21.00Electromagnets of a kind used solely or principally for magnetic resonance imaging apparatus other than electromagnets of heading 9018
0.00 %8505.90.29.10For use in certain types of aircraft
1.80 %8505.90.29.99Other
1.80 %8505.90.50.10For use in certain types of aircraft
2.20 %8505.90.50.90Other
2.20 %8505.90.90.10For use in certain types of aircraft
1.80 %8505.90.90.20Electromagnetic clutch coil in a cylindrical metal housing
- the metal housing is made of hot-rolled steel complying with standard JIS G 3131 - SPHE,
- the coil is made of copper wire,
- with a weight of 0,4kg or more but not more than 0,85kg,
- with a width of 20mm or more but not more than 45mm,
- with a plate reinforced to the coil (coil backplate) with an internal diameter of 44mm or more but not more than 46mm,
- with an external diameter of 87mm or more but not more than 110mm,
- without plunger,
- with one connector
1.80 %8505.90.90.90Other
1.80 %Source: EU TARIC database (European Commission). For informational purposes only. Consult the official TARIC and a licensed customs broker for binding rates.