Subheading 8708.50
EU TARICPts. & access. of tractors suitable for agricultural use, drive axles w/differential (whether or not w/other transm. components)
30 TARIC codes
| TARIC Code | Description | Third-Country Duty |
|---|---|---|
| 8708.50.20.15 | Spherical outboard constant velocity joint ball bearing cage, part of the vehicle's drive system, made of material suitable to be carburized with a carbon content of 0,14 % or more but not more than 0,57 %, forged, turned, punched, milled and hardened | — |
| 8708.50.20.18 | Propeller shaft for torque transmission from the gearbox to the rear axle, consisting of: -two cardan rods, -central universal joint, -central bearing with suspension in a plastic cover, -universal joints on both ends of the shaft, -slip, tube and end yokes, -of a length of 1,4 m or more but not more than 2,4 m, for use in the production of goods of Chapter 87 | — |
| 8708.50.20.20 | Transmission shaft in carbon fibre reinforced plastics consisting of a unique piece without any joint in the middle -|of a length of| 1|m or more but not more than 2|m, -|of a weight of 6|kg or more but not more than 9|kg | — |
| 8708.50.20.25 | Ball-type outboard constant velocity joint housing for transmitting a torque from the engine and transmission to the wheels of motor vehicles, in a form of an outer race, with: -6 ball tracks or more but not more than 8, with -a thread, -an external involute spline with 21 or more but not more than 38 teeth, -for running with bearing balls made of steel with a carbon content of 0,48 % or more but not more than 0,57 %, -forged, turned, milled and hardened | — |
| 8708.50.20.35 | Inboard constant velocity joint tripod housing, with: -an outer diameter of 67,0 mm or more but not more than 99,0 mm, -3 cold calibrated roller tracks with a diameter of 29,95 mm or more but not more than 49,2 mm, -an external spline with 21 teeth or more but not more than 41, -forged, turned, rolled and hardened | — |
| 8708.50.20.50 | Double flange bearing of 3rd generation, for motor vehicles, -|with double-row ball bearing, -|whether or not with impulse (encoder) ring, -|whether or not with antilock brake system (ABS) sensor, -|whether or not with mounted screws, for use in the manufacture of goods of chapter 87 | — |
| 8708.50.20.55 | Inboard constant velocity joint tripod spider, part of the vehicle's drive system, with: -3 trunnions with a diameter of 17,128 mm or more but not more than 25,468 mm, -forged, turned, broached and hardened | — |
| 8708.50.20.70 | Housing of tripod type half shaft inboard joint for transmitting a torque from engine and transmission to wheels of motor vehicles with: -an outer diameter of 67,0 mm or more but not more than 84,5 mm, -3 cold calibrated roller tracks with a diameter of 29,90 mm or more but not more than 36,60 mm, - sealing diameter 34,0 mm or more but not more than 41,0 mm, without lead angle, -spline with 21 teeth or more but not more than 35, -bearing seat diameter of 25,0 mm or more but not more than 30,0 mm, with or without oil grooves | — |
| 8708.50.20.75 | Constant velocity joint assembly for transmitting a torque from engine and transmission to wheels of motor vehicles, consisting of: - an inner race with 6 ball tracks or more but not more than 8 for running with the bearing balls with a diameter of 13,0mm or more but not more than 28,0mm, - an outer race with 6 ball tracks or more but not more than 8 for running with the bearing balls, made of steel with carbon content of 0,45% or more but not more than 0,58%, with thread and with a spline with 22 teeth or more but not more than 44, - a spherical cage keeping bearing balls in the ball tracks of outer race and inner race in proper angular position, made of material suitable for carburizing with carbon content of 0,14% or more but not more than 0,55%, and - with a grease compartment, - capable of working at constant speed at variable articulation angle not higher than 52 degrees | — |
| 8708.50.20.80 | Specific pre-assembled or ready-to assemble sections for new mobile cranes | — |
| 8708.50.20.90 | Other | — |
| 8708.50.35.11 | Specific pre-assembled or ready-to assemble sections for new mobile cranes | 4.50 % |
| 8708.50.35.90 | Other | 4.50 % |
| 8708.50.55.11 | Specific pre-assembled or ready-to assemble sections for new mobile cranes | 4.50 % |
| 8708.50.55.20 | Double flange bearing of 3rd generation, for motor vehicles, -|with double-row ball bearing, -|whether or not with impulse (encoder) ring, -|whether or not with antilock brake system (ABS) sensor, -|whether or not with mounted screws, for use in the manufacture of goods of chapter 87 | 4.50 % |
| 8708.50.55.50 | Spherical outboard constant velocity joint ball bearing cage, part of the vehicle's drive system, made of material suitable to be carburized with a carbon content of 0,14 % or more but not more than 0,57 %, forged, turned, punched, milled and hardened | 4.50 % |
| 8708.50.55.91 | Specific pre-assembled or ready-to assemble sections for new mobile cranes | 4.50 % |
| 8708.50.55.99 | Other | 4.50 % |
| 8708.50.91.10 | Double flange bearing of 3rd generation, for motor vehicles, -|with double-row ball bearing, -|whether or not with impulse (encoder) ring, -|whether or not with antilock brake system (ABS) sensor, -|whether or not with mounted screws, for use in the manufacture of goods of chapter 87 | 4.50 % |
| 8708.50.91.11 | Specific pre-assembled or ready-to assemble sections for new mobile cranes | 4.50 % |
| 8708.50.91.90 | Other | 4.50 % |
| 8708.50.99.10 | Transmission shaft in carbon fibre reinforced plastics consisting of a unique piece without any joint in the middle -|of a length of| 1|m or more but not more than 2|m, -|of a weight of 6|kg or more but not more than 9|kg | 3.50 % |
| 8708.50.99.25 | Housing of tripod type half shaft inboard joint for transmitting a torque from engine and transmission to wheels of motor vehicles with: -an outer diameter of 67,0 mm or more but not more than 84,5 mm, -3 cold calibrated roller tracks with a diameter of 29,90 mm or more but not more than 36,60 mm, - sealing diameter 34,0 mm or more but not more than 41,0 mm, without lead angle, -spline with 21 teeth or more but not more than 35, -bearing seat diameter of 25,0 mm or more but not more than 30,0 mm, with or without oil grooves | 3.50 % |
| 8708.50.99.35 | Constant velocity joint assembly for transmitting a torque from engine and transmission to wheels of motor vehicles, consisting of: - an inner race with 6 ball tracks or more but not more than 8 for running with the bearing balls with a diameter of 13,0mm or more but not more than 28,0mm, - an outer race with 6 ball tracks or more but not more than 8 for running with the bearing balls, made of steel with carbon content of 0,45% or more but not more than 0,58%, with thread and with a spline with 22 teeth or more but not more than 44, - a spherical cage keeping bearing balls in the ball tracks of outer race and inner race in proper angular position, made of material suitable for carburizing with carbon content of 0,14% or more but not more than 0,55%, and - with a grease compartment, - capable of working at constant speed at variable articulation angle not higher than 52 degrees | 3.50 % |
| 8708.50.99.40 | Double flange bearing of 3rd generation, for motor vehicles, -|with double-row ball bearing, -|whether or not with impulse (encoder) ring, -|whether or not with antilock brake system (ABS) sensor, -|whether or not with mounted screws, for use in the manufacture of goods of chapter 87 | 3.50 % |
| 8708.50.99.45 | Ball-type outboard constant velocity joint housing for transmitting a torque from the engine and transmission to the wheels of motor vehicles, in a form of an outer race, with: -6 ball tracks or more but not more than 8, with -a thread, -an external involute spline with 21 or more but not more than 38 teeth, -for running with bearing balls made of steel with a carbon content of 0,48 % or more but not more than 0,57 %, -forged, turned, milled and hardened | 3.50 % |
| 8708.50.99.50 | Inboard constant velocity joint tripod housing, with: -an outer diameter of 67,0 mm or more but not more than 99,0 mm, -3 cold calibrated roller tracks with a diameter of 29,95 mm or more but not more than 49,2 mm, -an external spline with 21 teeth or more but not more than 41, -forged, turned, rolled and hardened | 3.50 % |
| 8708.50.99.60 | Inboard constant velocity joint tripod spider, part of the vehicle's drive system, with: -3 trunnions with a diameter of 17,128 mm or more but not more than 25,468 mm, -forged, turned, broached and hardened | 3.50 % |
| 8708.50.99.70 | Specific pre-assembled or ready-to assemble sections for new mobile cranes | 3.50 % |
| 8708.50.99.90 | Other | 3.50 % |
Source: EU TARIC database (European Commission). For informational purposes only. Consult the official TARIC and a licensed customs broker for binding rates.