Subheading 8708.91
EU TARICPts. & access. of tractors suitable for agricultural use, radiators
11 TARIC codes
| TARIC Code | Description | Third-Country Duty |
|---|---|---|
| 8708.91.20.20 | Aluminium cooler using compressed air with a ribbed design of a kind used in the manufacture of goods of Chapter 87 | — |
| 8708.91.20.30 | Aluminium alloy inlet or outlet air tank of heat exchangers for car cooling systems, manufactured to standard EN AC 42100 or EN AC 43000 T6 with -|an insulating area flatness of not more than 0,1|mm, -|a permissible particle quantity of 0,3|mg per tank, -|a distance between pores of 2|mm or more, -|pore sizes of not more than 0,4|mm, and -|not more than 3|pores larger than 0,2mm -with a weight of 0,2kg or more but not more than 3kg | — |
| 8708.91.20.90 | Other | — |
| 8708.91.35.10 | Aluminium cooler using compressed air with a ribbed design of a kind used in the manufacture of goods of Chapter 87 | 4.50 % |
| 8708.91.35.20 | Turbocharger cooling duct containing: -an aluminum alloy duct with at least one metal holder and at least two mounting holes, -a rubber pipe with clips, -a stainless steel flange highly resistant to corrosion [SUS430JIL], for use in the manufacture of compression ignition engines of motor vehicles | 4.50 % |
| 8708.91.35.30 | Two-circuit aluminum heat exchanger for automatic transmission of passenger cars: -of the stack-plate type, -with two pairs of inlet and outlet, each for the coolant/water circuit and the transmission oil circuit, -with at least two mounting holes, -whether or not with the connection hoses, for use in the manufacture of goods of Chapter 87 | 4.50 % |
| 8708.91.35.40 | Radiators: -with corrosion protection, -for pressures up to 150 PSI (1034 kPa), -with individual replaceable, cooling tubes in brass or copper, for use in the production of engine and charge air cooling with a weight of 265 kg or more but not more than 599 kg | 4.50 % |
| 8708.91.35.90 | Other | 4.50 % |
| 8708.91.91.00 | Of closed-die forged steel | 4.50 % |
| 8708.91.99.30 | Aluminium alloy inlet or outlet air tank of heat exchangers for car cooling systems, manufactured to standard EN AC 42100 or EN AC 43000 T6 with -|an insulating area flatness of not more than 0,1|mm, -|a permissible particle quantity of 0,3|mg per tank, -|a distance between pores of 2|mm or more, -|pore sizes of not more than 0,4|mm, and -|not more than 3|pores larger than 0,2mm -with a weight of 0,2kg or more but not more than 3kg | 3.50 % |
| 8708.91.99.90 | Other | 3.50 % |
Source: EU TARIC database (European Commission). For informational purposes only. Consult the official TARIC and a licensed customs broker for binding rates.