Heading 73.04

EU TARIC

Tubes, pipes and hollow profiles, seamless, of iron (other than cast iron) or steel

13 subheadings · 51 TARIC codes

7304.11Stainless steel, seamless line pipe used for oil or gas pipelines2 codes

Code / DescriptionThird-Country Duty

7304.11.00.10Of circular cross-section, of an external diameter not exceeding 406,4 mm and with a Carbon Equivalent Value (CEV) not exceeding 0,86 according to the International Institute of Welding (IIW) formula and chemical analysis

7304.11.00.90Other

7304.19Iron (o/than cast) or nonalloy steel, seamless line pipe used for oil and gas pipelines5 codes

Code / DescriptionThird-Country Duty

7304.19.10.20Of circular cross-section and with a Carbon Equivalent Value (CEV) not exceeding 0,86 according to the International Institute of Welding (IIW) formula and chemical analysis

7304.19.10.80Other

7304.19.30.20Of circular cross-section and with a Carbon Equivalent Value (CEV) not exceeding 0,86 according to the International Institute of Welding (IIW) formula and chemical analysis

7304.19.30.80Other

7304.19.90.00Of an external diameter exceeding 406,4|mm

7304.22Stainless steel, seamless drill pipe, of a kind used in drilling for oil or gas2 codes

Code / DescriptionThird-Country Duty

7304.22.00.20Of circular cross-section, of an external diameter not exceeding 406,4|mm and with a Carbon Equivalent Value (CEV) not exceeding 0,86 according to the International Institute of Welding (IIW) formula and chemical analysis

7304.22.00.80Other

7304.23Iron (o/than cast) or nonalloy steel, seamless drill pipe, of a kind used in drilling for oil or gas2 codes

Code / DescriptionThird-Country Duty

7304.23.00.20Of circular cross-section, of an external diameter not exceeding 406,4|mm and with a Carbon Equivalent Value (CEV) not exceeding 0,86 according to the International Institute of Welding (IIW) formula and chemical analysis

7304.23.00.80Other

7304.24Stainless steel, seamless casing pipe, threaded or coupled, of a kind used in drilling for oil or gas2 codes

Code / DescriptionThird-Country Duty

7304.24.00.20Of circular cross-section, of an external diameter not exceeding 406,4|mm and with a Carbon Equivalent Value (CEV) not exceeding 0,86 according to the International Institute of Welding (IIW) formula and chemical analysis

7304.24.00.80Other

7304.29Iron (o/than cast) or nonalloy steel, seamless casing pipe, threaded or coupled, of a kind used in drilling for oil or gas6 codes

Code / DescriptionThird-Country Duty

7304.29.10.20Of circular cross-section and with a Carbon Equivalent Value (CEV) not exceeding 0,86 according to the International Institute of Welding (IIW) formula and chemical analysis

7304.29.10.80Other

7304.29.30.20Of circular cross-section and with a Carbon Equivalent Value (CEV) not exceeding 0,86 according to the International Institute of Welding (IIW) formula and chemical analysis

7304.29.30.80Other

7304.29.90.10Casings

7304.29.90.90Other

7304.31Iron (o/than cast) or nonalloy steel, seamless, cold-drawn or cold-rolled, hollow bars w/circular cross section4 codes

Code / DescriptionThird-Country Duty

7304.31.20.30Of an external diameter not exceeding 406,4 mm and with a Carbon Equivalent Value (CEV) not exceeding 0,86 according to the International Institute of Welding (IIW) formula and chemical analysis

7304.31.20.95Other

7304.31.80.30Of an external diameter not exceeding 406,4|mm and with a Carbon Equivalent Value (CEV) not exceeding 0,86 according to the International Institute of Welding (IIW) formula and chemical analysis

7304.31.80.99Other

7304.39Iron (o/than cast) or nonalloy steel, seamless, not cold-drawn or cold-rolled, tubes, pipes and hollow prof., w/circular cross sect., nesoi7 codes

Code / DescriptionThird-Country Duty

7304.39.50.30Of an external diameter not exceeding 406,4|mm and with a Carbon Equivalent Value (CEV) not exceeding 0,86 according to the International Institute of Welding (IIW) formula and chemical analysis

7304.39.50.99Other

7304.39.82.30With a Carbon Equivalent Value (CEV) not exceeding 0,86 according to the International Institute of Welding (IIW) formula and chemical analysis

7304.39.82.99Other

7304.39.83.20With a Carbon Equivalent Value (CEV) not exceeding 0,86 according to the International Institute of Welding (IIW) formula and chemical analysis

7304.39.83.80Other

7304.39.88.00Exceeding 406,4|mm

7304.41Stainless steel, seamless, cold-drawn/cold-rolled, tubes, pipes and hollow profiles, w/circular cross section & extern. diam less than 19mm2 codes

Code / DescriptionThird-Country Duty

7304.41.00.10With attached fittings, suitable for conducting gases or liquids, for use in civil aircraft

7304.41.00.90Other

7304.49Stainless steel, seamless, not cold-drawn/cold-rolled, tubes, pipes and hollow profiles, w/circular cross section6 codes

Code / DescriptionThird-Country Duty

7304.49.83.10With attached fittings, suitable for conducting gases or liquids, for use in civil aircraft

7304.49.83.90Other

7304.49.85.10With attached fittings, suitable for conducting gases or liquids, for use in civil aircraft

7304.49.85.90Other

7304.49.89.10With attached fittings, suitable for conducting gases or liquids, for use in civil aircraft

7304.49.89.90Other

7304.51Alloy steel (o/than stainless), seamless, cold-drawn/cold-rolled, tubes, pipes, etc., w/circ. cross sect., for mfr of ball/roller bearings4 codes

Code / DescriptionThird-Country Duty

7304.51.10.00Straight and of uniform wall thickness, of alloy steel containing by weight not less than 0,9|% but not more than 1,15|% of carbon, not less than 0,5|% but not more than 2|% of chromium and, if present, not more than 0,5|% of molybdenum

7304.51.81.00Precision tubes

7304.51.89.30Of an external diameter not exceeding 406,4|mm and with a Carbon Equivalent Value (CEV) not exceeding 0,86 according to the International Institute of Welding (IIW) formula and chemical analysis

7304.51.89.99Other

7304.59Alloy steel (o/than stainless), seamless, n/cold-drawn/cold-rolled, tubes, pipes, etc. w/circ. cross sect., for mfr ball/roller bearings6 codes

Code / DescriptionThird-Country Duty

7304.59.30.00Straight and of uniform wall thickness, of alloy steel containing by weight not less than 0,9|% but not more than 1,15|% of carbon, not less than 0,5|% but not more than 2|% of chromium and, if present, not more than 0,5|% of molybdenum

7304.59.82.30With a Carbon Equivalent Value (CEV) not exceeding 0,86 according to the International Institute of Welding (IIW) formula and chemical analysis

7304.59.82.99Other

7304.59.83.20With a Carbon Equivalent Value (CEV) not exceeding 0,86 according to the International Institute of Welding (IIW) formula and chemical analysis

7304.59.83.80Other

7304.59.89.00Of an external diameter exceeding 406,4|mm

7304.90Iron (o/than cast) or nonalloy steel, seamless, tubes, pipes and hollow profiles, o/than circ. cross sect., w/wall thickness of 4 mm or more3 codes

Code / DescriptionThird-Country Duty

7304.90.00.10With attached fittings, suitable for conducting gases or liquids, for use in civil aircraft

7304.90.00.91Tubes and pipes, of stainless steel

7304.90.00.99Other

Source: EU TARIC database (European Commission). For informational purposes only. Consult the official TARIC and a licensed customs broker for binding rates.