Heading 74.10

EU TARIC

Copper foil (whether or not printed or backed with paper, paperboard, plastics or similar backing materials) of a thickness (excluding any backing) not exceeding 0.15 mm

4 subheadings · 11 TARIC codes

7410.11Refined copper, foil, w/thickness of 0.15 mm or less, not backed2 codes

Code / DescriptionThird-Country Duty

7410.11.00.50Refined copper foil and strips, electrolytically manufactured, with a thickness of 0,015 mm or more but not more than 0,150 mm, used for the manufacture of laminates for Printed Circuit Boards and of Printed Circuit Boards in the printed circuit board industry

5.20 %

7410.11.00.90Other

5.20 %

7410.12Copper alloys, foil, w/thickness of 0.15 mm or less, not backed1 code

Code / DescriptionThird-Country Duty

7410.12.00.00Of copper alloys

5.20 %

7410.21Refined copper, clad laminates, w/thickness of 0.15 mm or less, backed7 codes

Code / DescriptionThird-Country Duty

7410.21.00.10Sheet or plate of polytetrafluoroethylene, containing aluminium oxide or titanium dioxide as filler or reinforced with glass-fibre fabric, covered on both sides with copper foil

5.20 %

7410.21.00.20Foils, rolls composed of one layer of glass epoxy of 100|µm colaminated with refined copper foil on one or two sides of 35|µm with a tolerance of 10|% for use in the production of smart cards

5.20 %

7410.21.00.30Film of polyimide, whether or not containing epoxide resin and/or glass fibre, covered on one side or on both sides with a copper foil

5.20 %

7410.21.00.40Sheet or plates: -|consisting of at least a central layer of paper or one central sheet of any type of nonwoven fibre, laminated on each side with glass-fibre fabric and impregnated with epoxide resin, or -|consisting of multiple layers of paper, impregnated with phenolic resin, coated on one or both sides with a copper film with a maximum thickness of 0,15|mm

5.20 %

7410.21.00.50Plates: -consisting of at least one layer of fibreglass fabric impregnated with thermosetting resin, -covered on one or both sides with copper foil with a thickness of not more than 0,15 mm, and -with a dielectric constant (DK) of less than 3,9 and a loss factor (Df) of less than 0,015 at a measuring frequency of 10 GHz, as measured according to IPC-TM-650

5.20 %

7410.21.00.55Plates: - consisting of at least one layer of fibreglass fabric impregnated with epoxide resin, - covered on one or both sides with copper foil with a thickness of not more than 0,15 mm, - with a dielectric constant (DK) of less than 5,4 at 1 MHz, as measured according to IPC-TM-650 2.5.5.2, - with a loss tangent of less than 0,035 at 1 MHz, as measured according to IPC-TM-650 2.5.5.2, - with a comparative tracking index (CTI) of 600 or more

5.20 %

7410.21.00.90Other

5.20 %

7410.22Copper alloys, foil, w/thickness of 0.15 mm or less, backed1 code

Code / DescriptionThird-Country Duty

7410.22.00.00Of copper alloys

5.20 %

Source: EU TARIC database (European Commission). For informational purposes only. Consult the official TARIC and a licensed customs broker for binding rates.