Subheading 8501.10
EU TARICElectric motors of an output of under 18.65 W, synchronous, valued not over $4 each
24 TARIC codes
| TARIC Code | Description | Third-Country Duty |
|---|---|---|
| 8501.10.10.10 | For use in certain types of aircraft | 4.70 % |
| 8501.10.10.20 | Synchronous motor for a dishwasher with a water flow control mechanism with -|a length without axle of 24|mm (+/- 0,3), -|a diameter of 49,3|mm (+/- 0,3) -|a rated voltage of 220|V AC or more but not more than 240|V AC, -|a rated frequency of 50|Hz or more but not more than 60|Hz, -|an input power of not more than 4|W, -|a rotation speed of 4rpm or more but not more than 4,8rpm, -|an output torque of not less than 10kgf/cm | 4.70 % |
| 8501.10.10.40 | Synchronous hybrid stepper motor with: -an output not exceeding 18 W, -two phases, -a rated current of not more than 2,5 A/phase, -a rated voltage of not more than 20 V, -with or without a threaded shaft, for use in the manufacture of 3D printers | 4.70 % |
| 8501.10.10.50 | Linear actuator for automotive electric seat adjustment applications: -consisting of a permanently excited DC motor with an integrated gear mechanism and leadscrew, -whether brushed or brushless, -whether or not with electronic control unit, -whether or not with Hall Effect Sensor, -with a nominal voltage of 8 V or higher but not higher than 16 V, -with a rated output mechanical power not exceeding 20 W, and -with a specified temperature range from -40 °C to 160 °C, for use in the manufacture of automotive components for car's seats | 4.70 % |
| 8501.10.10.60 | Rotary actuator for automotive electric seat adjustment applications: -consisting of a permanently excited DC motor with an integrated gear mechanism, -whether brushed or brushless, -whether or not with electronic control unit, -whether or not with Hall Effect Sensor, -with a nominal voltage of 8 V or more but not more than 16 V, -with a rated output mechanical power not exceeding 35 W, and -with a specified temperature range from -40 °C to 160 °C, for use in the manufacture of automotive components for car's seats | 4.70 % |
| 8501.10.10.90 | Other | 4.70 % |
| 8501.10.91.10 | For use in certain types of aircraft | 2.70 % |
| 8501.10.91.90 | Other | 2.70 % |
| 8501.10.93.10 | For use in certain types of aircraft | 2.70 % |
| 8501.10.93.90 | Other | 2.70 % |
| 8501.10.99.10 | For use in certain types of aircraft | 2.70 % |
| 8501.10.99.20 | Worm axis motor for automotive electric seat adjustment applications: -consisting of a permanently excited DC motor with a worm wheel, -whether brushed or brushless, -whether or not with electronic control unit, -whether or not with Hall Effect Sensor, -with a nominal voltage of 8 V or more but not more than 16 V, -with a rated output mechanical power not exceeding 35 W, and -with a specified temperature range from -40 °C to 160 °C, for use in the manufacture of automotive components for car's seats | 2.70 % |
| 8501.10.99.30 | Linear actuator for automotive electric seat adjustment applications: -consisting of a permanently excited DC motor with an integrated gear mechanism and leadscrew, -whether brushed or brushless, -whether or not with electronic control unit, -whether or not with Hall Effect Sensor, -with a nominal voltage of 8 V or higher but not higher than 16 V, -with a rated output mechanical power not exceeding 20 W, and -with a specified temperature range from -40 °C to 160 °C, for use in the manufacture of automotive components for car's seats | 2.70 % |
| 8501.10.99.40 | Rotary actuator for automotive electric seat adjustment applications: -consisting of a permanently excited DC motor with an integrated gear mechanism, -whether brushed or brushless, -whether or not with electronic control unit, -whether or not with Hall Effect Sensor, -with a nominal voltage of 8 V or more but not more than 16 V, -with a rated output mechanical power not exceeding 35 W, and -with a specified temperature range from -40 °C to 160 °C, for use in the manufacture of automotive components for car's seats | 2.70 % |
| 8501.10.99.50 | Electric (DC) motor powering height adjusting with: -a rated output mechanical power not exceeding 35 W, -frame integration with a length of 156 mm, a height of 59 mm, a thickness of 36 mm and a weight of 500 g, -a stall torque of 45 Nm and ultimate torque of 200 Nm, -a maximum current of 15 A, -no load speed of 7 RPM or more but not more than 10 RPM, -a rotation speed of 4 000 RPM or more but not more than 5 600 RPM, -a maximum noise level of 42 dB(A), -a maximum angular backlash up to 3 degrees, and -a 8 tooth pinion module, for use in the manufacture of automotive components for car's seats | 2.70 % |
| 8501.10.99.56 | DC Motor: - with a speed rotation of not more than 7 000 rpm without load, - with a nominal voltage of not more than 18 V, - with a maximum power of 24 W, - for a specific temperature range from -40°C to 160°C, - with or without a gear connection, - with or without a mechanical attachment interface, - with 2 electrical connections, - with a maximum torque of 100 Nm | 2.70 % |
| 8501.10.99.58 | DC Motor : -|with a speed rotation of not more than|6500|rpm (without load), -|with a nominal| voltage of 12|V (± 4|V), -|with a maximal power below than 20|W, -|with a specified temperature range from -40°C to 160°C, -|with a worm gear drive, -|with a mechanical attachment interface, -|with 2|electrical connections, -|with a maximum torque of 75|Nm | 2.70 % |
| 8501.10.99.60 | DC motor -|with a rotor speed of 3|500|rpm or more but not more than 5|000|rpm loaded and not more than 6|500|rpm when not loaded -|with a power supply voltage of 100|V or more but not more than 240|V for use in the manufacture of electric fryers | 2.70 % |
| 8501.10.99.64 | DC motor to control angular position of the flap to adjust gas flow in the Air Throttle and EGR valve: -with Ingress Protection (IP) standard of IP69, -with a rotor speed of not more than 6 500 rpm when not loaded, -with a rated voltage of 12,0 V (± 0,1), -of a specified temperature range of - 40 °C or more but not more than 165 °C, -with or without a connecting pinion, -with or without an engine connector, -with or without a flange, -with a diameter of not more than 40 mm (not including the flange), -with an overall height of not more than 90 mm (from the base to the pinion) | 2.70 % |
| 8501.10.99.65 | Electric turbocharger actuator, with: -|a DC motor, -|an integrated gear mechanism, -|a (pulling)force of 200|N or more at a minimum of 140°C elevated ambient temperature, -|a (pulling) force of 250|N or more in each position of its stroke, -|an effective stroke of 15|mm or more but not more than 25|mm, -|with or without an on-board diagnostics interface | 2.70 % |
| 8501.10.99.70 | DC stepping motor, with -|a two-phase winding,| -|a rated voltage of 9|V or more, but not more than 16,0|V -|of a specified temperature range covering at least|- 40|°C to +|105|°C -|with or without connecting pinion -|with or without motor drive connector | 2.70 % |
| 8501.10.99.75 | Permanently excited DC motor with - a multiple-phase winding, - an external diameter of 24 mm or more but not more than 38 mm, - a rated speed of not more than 12 000 rpm, - a power supply voltage of 8 V or more but not more than 27 V, - with or without a pulley, - with or without a gear wheel | 2.70 % |
| 8501.10.99.79 | DC motor with brushes and an internal rotor with a three-phase winding, whether or not equipped with a worm or a pinion, of a specified temperature range covering at least - 20°C to + 70°C | 2.70 % |
| 8501.10.99.90 | Other | 2.70 % |
Source: EU TARIC database (European Commission). For informational purposes only. Consult the official TARIC and a licensed customs broker for binding rates.