Heading 85.01
EU TARICElectric motors and generators (excluding generating sets)
17 subheadings · 117 TARIC codes
Code / DescriptionThird-Country Duty
8501.10.10.10For use in certain types of aircraft
4.70 %8501.10.10.20Synchronous motor for a dishwasher with a water flow control mechanism with
-|a length without axle of 24|mm (+/- 0,3),
-|a diameter of 49,3|mm (+/- 0,3)
-|a rated voltage of 220|V AC or more but not more than 240|V AC,
-|a rated frequency of 50|Hz or more but not more than 60|Hz,
-|an input power of not more than 4|W,
-|a rotation speed of 4rpm or more but not more than 4,8rpm,
-|an output torque of not less than 10kgf/cm
4.70 %8501.10.10.40Synchronous hybrid stepper motor with: -an output not exceeding 18 W, -two phases, -a rated current of not more than 2,5 A/phase, -a rated voltage of not more than 20 V, -with or without a threaded shaft, for use in the manufacture of 3D printers
4.70 %8501.10.10.50Linear actuator for automotive electric seat adjustment applications: -consisting of a permanently excited DC motor with an integrated gear mechanism and leadscrew, -whether brushed or brushless, -whether or not with electronic control unit, -whether or not with Hall Effect Sensor, -with a nominal voltage of 8 V or higher but not higher than 16 V, -with a rated output mechanical power not exceeding 20 W, and -with a specified temperature range from -40 °C to 160 °C, for use in the manufacture of automotive components for car's seats
4.70 %8501.10.10.60Rotary actuator for automotive electric seat adjustment applications: -consisting of a permanently excited DC motor with an integrated gear mechanism, -whether brushed or brushless, -whether or not with electronic control unit, -whether or not with Hall Effect Sensor, -with a nominal voltage of 8 V or more but not more than 16 V, -with a rated output mechanical power not exceeding 35 W, and -with a specified temperature range from -40 °C to 160 °C, for use in the manufacture of automotive components for car's seats
4.70 %8501.10.10.90Other
4.70 %8501.10.91.10For use in certain types of aircraft
2.70 %8501.10.91.90Other
2.70 %8501.10.93.10For use in certain types of aircraft
2.70 %8501.10.93.90Other
2.70 %8501.10.99.10For use in certain types of aircraft
2.70 %8501.10.99.20Worm axis motor for automotive electric seat adjustment applications: -consisting of a permanently excited DC motor with a worm wheel, -whether brushed or brushless, -whether or not with electronic control unit, -whether or not with Hall Effect Sensor, -with a nominal voltage of 8 V or more but not more than 16 V, -with a rated output mechanical power not exceeding 35 W, and -with a specified temperature range from -40 °C to 160 °C, for use in the manufacture of automotive components for car's seats
2.70 %8501.10.99.30Linear actuator for automotive electric seat adjustment applications: -consisting of a permanently excited DC motor with an integrated gear mechanism and leadscrew, -whether brushed or brushless, -whether or not with electronic control unit, -whether or not with Hall Effect Sensor, -with a nominal voltage of 8 V or higher but not higher than 16 V, -with a rated output mechanical power not exceeding 20 W, and -with a specified temperature range from -40 °C to 160 °C, for use in the manufacture of automotive components for car's seats
2.70 %8501.10.99.40Rotary actuator for automotive electric seat adjustment applications: -consisting of a permanently excited DC motor with an integrated gear mechanism, -whether brushed or brushless, -whether or not with electronic control unit, -whether or not with Hall Effect Sensor, -with a nominal voltage of 8 V or more but not more than 16 V, -with a rated output mechanical power not exceeding 35 W, and -with a specified temperature range from -40 °C to 160 °C, for use in the manufacture of automotive components for car's seats
2.70 %8501.10.99.50Electric (DC) motor powering height adjusting with: -a rated output mechanical power not exceeding 35 W, -frame integration with a length of 156 mm, a height of 59 mm, a thickness of 36 mm and a weight of 500 g, -a stall torque of 45 Nm and ultimate torque of 200 Nm, -a maximum current of 15 A, -no load speed of 7 RPM or more but not more than 10 RPM, -a rotation speed of 4 000 RPM or more but not more than 5 600 RPM, -a maximum noise level of 42 dB(A), -a maximum angular backlash up to 3 degrees, and -a 8 tooth pinion module, for use in the manufacture of automotive components for car's seats
2.70 %8501.10.99.56DC Motor:
- with a speed rotation of not more than 7 000 rpm without load,
- with a nominal voltage of not more than 18 V,
- with a maximum power of 24 W,
- for a specific temperature range from -40°C to 160°C,
- with or without a gear connection,
- with or without a mechanical attachment interface,
- with 2 electrical connections,
- with a maximum torque of 100 Nm
2.70 %8501.10.99.58DC Motor : -|with a speed rotation of not more than|6500|rpm (without load), -|with a nominal| voltage of 12|V (± 4|V), -|with a maximal power below than 20|W, -|with a specified temperature range from -40°C to 160°C, -|with a worm gear drive, -|with a mechanical attachment interface, -|with 2|electrical connections, -|with a maximum torque of 75|Nm
2.70 %8501.10.99.60DC motor
-|with a rotor speed of 3|500|rpm or more but not more than 5|000|rpm loaded and not more than 6|500|rpm when not loaded
-|with a power supply voltage of 100|V or more but not more than 240|V
for use in the manufacture of electric fryers
2.70 %8501.10.99.64DC motor to control angular position of the flap to adjust gas flow in the Air Throttle and EGR valve: -with Ingress Protection (IP) standard of IP69, -with a rotor speed of not more than 6 500 rpm when not loaded, -with a rated voltage of 12,0 V (± 0,1), -of a specified temperature range of - 40 °C or more but not more than 165 °C, -with or without a connecting pinion, -with or without an engine connector, -with or without a flange, -with a diameter of not more than 40 mm (not including the flange), -with an overall height of not more than 90 mm (from the base to the pinion)
2.70 %8501.10.99.65Electric turbocharger actuator, with: -|a DC motor, -|an integrated gear mechanism, -|a (pulling)force of 200|N or more at a minimum of 140°C elevated ambient temperature, -|a (pulling) force of 250|N or more in each position of its stroke, -|an effective stroke of 15|mm or more but not more than 25|mm, -|with or without an on-board diagnostics interface
2.70 %8501.10.99.70DC stepping motor, with -|a two-phase winding,| -|a rated voltage of 9|V or more, but not more than 16,0|V -|of a specified temperature range covering at least|- 40|°C to +|105|°C -|with or without connecting pinion -|with or without motor drive connector
2.70 %8501.10.99.75Permanently excited DC motor with
- a multiple-phase winding,
- an external diameter of 24 mm or more but not more than 38 mm,
- a rated speed of not more than 12 000 rpm,
- a power supply voltage of 8 V or more but not more than 27 V,
- with or without a pulley,
- with or without a gear wheel
2.70 %8501.10.99.79DC motor with brushes and an internal rotor with a three-phase winding, whether or not equipped with a worm or a pinion, of a specified temperature range covering at least - 20°C to + 70°C
2.70 %8501.10.99.90Other
2.70 %Code / DescriptionThird-Country Duty
8501.20.00.10Of an output exceeding|735|W but not exceeding|150|kW, for use in civil aircraft
—8501.20.00.20Of an output of less than 750|W or exceeding 150|kW, for use in certain types of aircraft
2.70 %8501.20.00.50Universal AC/DC motor, rotating: -with a nominal supply voltage of 230 V, -with a power of more than 37,5 W but not more than 2 000 W, -with a stator cross-section of 93 mm or more but not more than 103 mm and a thickness of 15 mm or more but not more than 45 mm, and -with or without a worm gear, gears or a gearbox, for the production of a torque to a transmission shaft for small domestic appliances
2.70 %8501.20.00.60Universal AC/DC motor, rotating: -with a nominal supply voltage of 230 V, -with a power of more than 37,5 W but not more than 1 200 W, -with a stator cross-section of 65 mm or more but not more than 75 mm and a thickness of 15 mm or more but not more than 45 mm, and -with or without a worm gear, gears or a gearbox, for the production of a torque to a transmission shaft for small domestic appliances
2.70 %8501.20.00.70Universal AC/DC motor, rotating: -with a nominal supply voltage of 230 V, -with a power of more than 37,5 W but not more than 700 W, -with a stator cross-section of 49 mm or more but not more than 59 mm and a thickness of 15 mm or more but not more than 45mm, and -with or without a worm gear, gears or a gearbox, for the production of a torque to a transmission shaft for small domestic appliances
2.70 %8501.20.00.90Other
2.70 %Code / DescriptionThird-Country Duty
8501.31.00.10Motors of an output exceeding|735|W, DC generators, for use in civil aircraft
—8501.31.00.20For use in certain types of aircraft
2.70 %8501.31.00.45DC motors, brushless, with:
-|an external diameter of 90|mm or more, but not more than 110|mm,
-|a rated speed of not more than 3|680|rpm,
-|an output of 600|W or more but not more than 740|W at 2|300|rpm and at 80|°C,
-|a supply voltage of 12|V,
-|a torque of not more than 5,67|Nm,
-|a rotor position sensor,
-|an electronic star-point relay, and
-|for use with an electric power steering control module
2.70 %8501.31.00.47Motor for automotive electric seat adjustment applications: -with a shaft output on both motor sides, -consisting of a permanently excited DC motor, -whether brushed or brushless, -whether or not with electronic control unit, -whether or not with Hall Effect Sensor, -with a nominal voltage of 8 V or more but not more than 16 V, -with a rated output mechanical power not exceeding 120 W, and -with a specified temperature range from -40 °C to 160 °C, for use in the manufacture of automotive components for car's seats
2.70 %8501.31.00.48Brushless DC electric motors:
-with a rated power of 240 W or more, but not more than 260 W,
-with a voltage of 36 V or higher, but not higher than 52 V
-with a torque of 20 Nm or more, but not more than 140 Nm,
-with a housing made of aluminum, aluminum alloy or plastic,
-with or without a built-in controller,
-with a communication function in the LIN or UART interface,
-weighing 1,5 kg or more, but not more than 5,0 kg,
-adapted for mounting in a bicycle frame
for use in the manufacture of e-bikes
2.70 %8501.31.00.49Brushless DC electric motors:
- with a rated power of 240 W or more, but not more than 260 W,
- with a voltage of 24 V or higher, but not higher than 52 V,
- with a torque of 30 Nm or more, but not more than 62 Nm,
- with a LIN, UART or CAN communication interface,
- with an internal planetary gearbox with fixed or variable ratio or direct drive,
- with a housing made of aluminum or aluminium alloy,
- with a weight of 1,5kg or more, but not more than 6kg,
- adapted for mounting in the front or rear bicycle wheel,
for use in the manufacture of e-bikes
2.70 %8501.31.00.50DC motors, brushless, with:|
-|an external diameter of 80|mm or more, but not more than 200|mm,
-|a supply voltage of 4|V or more, but not more than 16|V,
-|an output at 20|°C of 200|W or more, but not more than 750|W,
-|a torque at 20|°C of 2,00|Nm or more, but not more than 7,00|Nm,
-|a rated speed at 20|°C of 600|rpm or more, but not more than 3|100|rpm,
-|with or without a pulley,
- with or without an electronic power steering sensor/controller
2.70 %8501.31.00.52Electric brushless direct current motor finished with biocompatible materials such as stainless steel according to specification 17-4 PH or type 303, 316L, 400 with:
-a three-phase winding,
-an output power not exceeding 280 W,
-a length with gearhead of 116,1 mm or more but not more than 117,2 mm,
-an external diameter of 13,86 mm or more but no more than 13,92 mm,
-a maximum torque of motor with gearhead 246,6 mNm in 25℃,
-a no-load radial speed of motor with gearhead with 9 900 rpm, at 24V in 25°C,
-a weight of motor with gearhead of 70,5 g or more but not more than 71,5 g, a resistance to peak temperature of 140°C or more (non-operating), a maximal air leak between shaft and shaft seals of 15 Pa/s at given 2 Bars of pressure,
-14 functional pins for power and control purpose,
-a flexible printed circuit with length of 245 mm but no longer than 255 mm with mounted 8 pin male connector
for use in the manufacture of medical devices with right-left rotation and oscillation function
2.70 %8501.31.00.54Brushless DC electric motor, with:
-a rated voltage of 310 V,
-a rated power of 350 W or more but not more than 368 W,
-an input power of 500 W or more but not more than 550 W,
-output power of 350 W or more but not more than 400 W,
-an external diameter without bracket connector and pulley of 143,2 mm or more but not more than 143,8 mm,
-a rated speed of 16300 rpm or more but not more than 16500 rpm,
-a weight of 2,33 kg or more but not more than 2,40 kg,
-a pulley
2.70 %8501.31.00.55DC motor with or without commutator, for driving hand-held power tools, lawn mowers or home appliances, with:
-an external diameter of 24,2 mm or more, but not more than 140 mm,
-a rated speed of 3300 rpm or more, but not more than 26200 rpm,
-a rated supply voltage of 3,6 V or more, but not more than 230 V,
-an output power of more than 37,5 W , but not more than 2400 W,
-a free load current of not more than 20,1 A,
-a maximum efficiency of 50 % or more,
2.70 %8501.31.00.56DC motor, brushless, integrated with an Electronic Control Unit (ECU), defined as a Power Pack with:
-a safety feature and mechanism designed for prevention of critical hazards like self-steer by single failure,
-a CAN-communication interface,
-an external sensor interface,
-operating temperature range of -40℃ to 95℃ or broader,
-compliance with standard IP6K9K for water and dustproofness,
-supply voltage of 9 V or more, but not more than 16 V,
-rated power output of 500 W or more, but not higher than 750 W,
-rated torque of 3 Nm or more, but not more than 6 Nm,
-length of 150 mm or more, but not more than 250 mm,
-width of 100 mm or more, but not more than 150 mm,
-height of 80 mm or more, but not more than 120 mm
2.70 %8501.31.00.57Brushless DC electric motor with LCD control indicator and/or control unit with buttons:
-with an output power of 200 W or more, but not more than 700 W,
-with a supply voltage of 30 V or more, but not more than 60 V,
-with a torque of 30 Nm or more, but not more than 200 Nm,
-with a height of 117 mm or more, but not more than 146 mm,
-with a length of 117 mm or more, but not more than 223 mm,
-with a width of 135 mm or more, but not more than 190 mm,
-with a weight of 2 kg or more but not more than 5 kg,
-designed to be mounted in a frame, front or rear bicycle wheel,
-equipped with sockets, at least for cable connection with LCD control indicator,
for use in the manufacture of electric bicycles
2.70 %8501.31.00.58Permanently excited DC motor with:
-an external diameter of 27 mm or more but not more than 90 mm, including mounting flange,
-a rated speed of not more than 25 000 rpm,
-an output of 45 W or more but not more than 400 W, and
-a supply voltage of 9 V or more but not more than 50 V,
-whether or not a multiple-phase winding,
-whether or not with a drive disc,
-whether or not with a crankcase,
-whether or not with a fan,
-whether or not with a cap assembly,
-whether or not with a sun gear,
-whether or not with a speed and rotational direction encoder,
-whether or not with or without a speed or rotational direction sensor of resolver type or Hall effect type,
-whether or not with a mounting flange
for use in the manufacture of air suspension seats in tractors, earthmoving machines and forklifts or for use in the manufacture of actuators for height-adjustable furniture
2.70 %8501.31.00.63Ready for installation in vehicles or equipment of headings 8432 and 8433, brushless and permanently excited direct current motor with:
- a specified speed of not more than 6000rpm,
- a minimum output of 400W, but not more than 1,3kW (at 12 V), or with a minimum output of 750W but not more than 1,55kW (at 36 V),
- a flange diameter of 85mm or more but not more than 200mm,
- a maximum length of 335mm, measured from the beginning of the shaft to the outer ending,
- a housing length of not more than 265mm, measured from the flange to the outer ending,
- a maximum of two-piece (basic housing including electric components and flange with minimum 2 and maximum 11 bore holes) aluminium diecast or sheet steel housing whether or not with a sealing compound (groove with an O-ring and grease),
- a stator with single T-tooth design and single coil windings in 9/6 or 12/8 or 12/10 topology, and
- surface magnets,
- whether or not with electronic power steering controller,
- whether or not with pulley or coupling,
- whether or not with rotor position sensor
2.70 %8501.31.00.68Camshaft actuator for controlling the timing of valve opening by using electromotor in a continuous variable valve timing system of an internal combustion piston engine, of: -a length of 110 mm or more but not more than 140 mm, -a width of 90 mm or more but not more than 130 mm, -a height of 80 mm or more but not more than 110 mm for use in the manufacture of engines of motor vehicles
2.70 %8501.31.00.85Power transmission device for controlling the output of exhaust gas turbochargers, consisting of:
- a DC motor of an output not exceeding 600 W,
- for usage with a supply voltage of 8 V or more but no more than 48 V,
- with motor connection (plug-in connection),
- whether or not with position sensor,
- whether or not with integrated control and power electronics,
- whether or not with spring mechanism for resetting the lever,
- built in a housing with reduction gear and lever attached to the motor drive shaft, or
- built in a housing with threads integrated into the rotor of the motor for linear movement of the integrated control rod
2.70 %8501.31.00.99Other
2.70 %Code / DescriptionThird-Country Duty
8501.32.00.10For use in civil aircraft
—8501.32.00.40DC motor with or without commutator, for driving hand-held power tools, lawn mowers or home appliances, with:
-an external diameter of 24,2 mm or more, but not more than 140 mm,
-a rated speed of 3300 rpm or more, but not more than 26200 rpm,
-a rated supply voltage of 3,6 V or more, but not more than 230 V,
-an output power of more than 37,5 W , but not more than 2400 W,
-a free load current of not more than 20,1 A,
-a maximum efficiency of 50 % or more,
2.70 %8501.32.00.65Ready for installation in vehicles or equipment of headings 8432 and 8433, brushless and permanently excited direct current motor with:
- a specified speed of not more than 6000rpm,
- a minimum output of 400W, but not more than 1,3kW (at 12 V), or with a minimum output of 750W but not more than 1,55kW (at 36 V),
- a flange diameter of 85mm or more but not more than 200mm,
- a maximum length of 335mm, measured from the beginning of the shaft to the outer ending,
- a housing length of not more than 265mm, measured from the flange to the outer ending,
- a maximum of two-piece (basic housing including electric components and flange with minimum 2 and maximum 11 bore holes) aluminium diecast or sheet steel housing whether or not with a sealing compound (groove with an O-ring and grease),
- a stator with single T-tooth design and single coil windings in 9/6 or 12/8 or 12/10 topology, and
- surface magnets,
- whether or not with electronic power steering controller,
- whether or not with pulley or coupling,
- whether or not with rotor position sensor
2.70 %8501.32.00.99Other
2.70 %Code / DescriptionThird-Country Duty
8501.33.10.00Hydrogen fuel cell generators
2.70 %8501.33.90.10Motors of an output not exceeding 150 kW and generators, for use in civil aircraft
—8501.33.90.20Of an output exceding 150 kW, for use in certain types of aircraft
2.70 %8501.33.90.30Electric drive for motor vehicles, with an output of not more than 315 kW:
- with an AC or DC motor with or without transmission,
- with or without power electronics
2.70 %8501.33.90.99Other
2.70 %Code / DescriptionThird-Country Duty
8501.34.00.10Generators for use in civil aircraft
—8501.34.00.99Other
2.70 %Code / DescriptionThird-Country Duty
8501.40.20.10Of an output exceeding|735|W, for use in civil aircraft
—8501.40.20.20For use in certain types of aircraft
2.70 %8501.40.20.35Electric AC motor, single-phase, with: -a rated power of 120 W or more but not more than 150 W, -an input power of 280 W or more but not more than 350 W, -an external diameter without bracket connector and pulley of 145 mm or more but not more than 160 mm, -a rated speed of 2 680 rpm or more but not more than 3 000 rpm, -a weight of 4,2 kg or more but not more than 4,6 kg, -pulleys, a spindle and a tachometer, for use in the manufacture of home appliance products
2.70 %8501.40.20.45Electric AC motor, single-phase, with: -a rated power of 275 W or more, but not more than 325 W, -an input power of 600 W or more but not more than 700 W, -an external diameter without bracket and connector of 150 mm or more but not more than 170 mm, -a rated speed of 15 000 rpm or more but not more than 20 000 rpm, -a weight of 4,2 kg or more, -a pulley and a tachometer, for use in the manufacture of home appliance products
2.70 %8501.40.20.50Electric AC motor, single-phase, with: -a rated power of 300 W or more but not more than 370 W, -an input power of 600 W or more but not more than 700 W, -an external diameter without bracket and connector of 150 mm or more but not more than 170 mm, -a rated speed of 15 000 rpm or more but not more than 19 000 rpm, -a weight of 4,8 kg or more, -a pulley, for use in the manufacture of home appliance products
2.70 %8501.40.20.55Electric AC motor, single-phase, with: -a rated power of 275 W or more, but not more than 325 W, -an input power of 600 W or more but not more than 700 W, -an external diameter without bracket and connector of 160 mm or more but not more than 180 mm, -a rated speed of 15 000 rpm or more but not more than 19 000 rpm, -a weight of not more than 4,4 kg, -a pulley, for use in the manufacture of home appliance products
2.70 %8501.40.20.60Electric AC motor, single-phase, with: -a rated power of 275 W or more but not more than 325 W, -an output power of 550 W or more but not more than 600 W, -an input power of 800 W or more but not more than 1 000 W, -an external diameter of more than 150 mm but not more than 170 mm without the bracket, -a rated speed of more than 16 000 rpm but not more than 18 000 rpm, -a weight of 3,4 kg or more but not more than 3,7 kg, -a pulley, for use in the manufacture of home appliance products
2.70 %8501.40.20.70Electric AC motor, single-phase, whether or not with commutator
- with a nominal output of 180 W or more,
- with an input power of 150 W or more but not more than 2 700 W,
- with an external diameter of more than 44,8 but not more than 135,2 mm,
- with a rated speed of more than 10 000 rpm but not more than 50 000 rpm,
- whether or not equipped with air-inducting ventilator,
- whether or not with mechanical device (pinion, screws, gear connection etc.) on the shaft,
for use in the manufacture of domestic appliances
2.70 %8501.40.20.75Incomplete, single-phase brushless AC motor consisting of a rotor and a stator:
-a rotor on the inside is equipped with a ring of 12 magnets housed in a steel casing,
-a stator with an internal diameter of 206,6 mm (± 0,5 mm), external diameter of 265,0 mm (± 0,2 mm) and width of 37,2 mm or more but not more than 47,8 mm,
-with a rated power not exceeding 750 W,
-with a weight of 5 kg or more,
for use in the production of washing machines, washer-dryers equipped with a drum with direct drive
2.70 %8501.40.20.80Other
2.70 %8501.40.80.10Of an output not exceeding|150|kW, for use in civil aircraft
—8501.40.80.20Of an output exceeding|150|kW, for use in certain types of aircraft
2.70 %8501.40.80.50Electric drive for motor vehicles, with an output of not more than 315 kW: - with an AC or DC motor with or without transmission, - with or without power electronics
2.70 %8501.40.80.70Electric AC motor, single-phase, whether or not with commutator
- with a nominal output of 180 W or more,
- with an input power of 150 W or more but not more than 2 700 W,
- with an external diameter of more than 44,8 but not more than 135,2 mm,
- with a rated speed of more than 10 000 rpm but not more than 50 000 rpm,
- whether or not equipped with air-inducting ventilator,
- whether or not with mechanical device (pinion, screws, gear connection etc.) on the shaft,
for use in the manufacture of domestic appliances
2.70 %8501.40.80.90Other
2.70 %Code / DescriptionThird-Country Duty
8501.51.00.10Of an output exceeding|735|W, for use in civil aircraft
—8501.51.00.20Of an output of less than 750|W, for use in certain types of aircraft
2.70 %8501.51.00.25Electric permanent magnet synchronous motor with:
-an output power of 550 W,
-a rotor containing 8 poles generated by permanent magnets composed mainly with neodymium-iron-boron (per GB/T 13560 standard) enclosed in polyethylene cover,
-an outer diameter of motor magnet shaft end with dimension of 10,001 mm or more but no more than 10,007 mm,
-terminals located across the radius 32,5 mm and separated by an angle of 21,8°,
-a motor housing made of ADC12 or AC46000 aluminium alloy die casting with composition of aluminium-silicon-copper (per JIS H5302 or EN1706 standard),
-a back electromotive force constant (Ke) of 0,03306 V-sec/rad or more but no more than 0,03654 V-sec/rad,
-a back electromotive force harmonic order - 5th of no more than 0,38 % (of fundamental) and 7th of no more than 0,25 % (of fundamental),
-a cogging torque of no more than 13 mNm,
-a friction torque in ambient temperature of no more than 22 mNm,
-a maximum temperature of motor operation of no more than 200 °C
2.70 %8501.51.00.30AC synchronous servo motor with resolver and brake for a maximum speed of not more than 6 000rpm,With:
- an output of 340W or more but not more than 7,4kW,
- a flange of dimensions of not more than 180mm × 180mm, and
- a length from flange to extreme end of resolver of not more than 271mm
2.70 %8501.51.00.35Electric permanent magnet synchronous motor with:
-an output power of 600 W,
-a rotor containing 8 poles generated by permanent magnets composed mainly with neodymium-iron-boron and dysprosium enclosed in aluminium cover,
-an outer diameter of motor magnet shaft end with dimension of 10,001 mm or more but no more than 10,007 mm,
-terminals located across the diameter 59,2 mm and separated by an angle 30,0°,
-a housing made of electrogalvanized steel (per JIS G3313 Grade SECE standard) using a deep-drawing stamping process,
-a diameter of 88,600 mm or less but no less than 88,546 mm at the motor-system assembly interface,
-a back electromotive force constant (Ke) of 0,03277 V-sec/rad or more but no more than 0,03623 V-sec/rad,
-a back electromotive force harmonic order - 5th of no more than 0,35 % (of fundamental) and 7th of no more than 0,30 % (of fundamental),
-a cogging torque of no more than 12 mNm,
-a friction torque in ambient temperature of no more than 23 mNm,
-a maximum temperature of motor operation of no more than 200 °C
2.70 %8501.51.00.40Electric AC motor, three-phase, with: -a rated power of 280 W or more but not more than 320 W, -an output power of 480 W or more but not more than 540 W, -an input power of 800 W or more but not more than 900 W, -an external diameter of 150 mm or more but not more than 170 mm, -a rated speed of 15 000 rpm or more but not more than 20 000 rpm, -a weight of 6 kg or more but not more than 6,4 kg, -a pulley and a tachometer, for use in the manufacture of home appliance products
2.70 %8501.51.00.45Automotive-ready brushless permanently excited magnet synchronous alternating current motor with:
-a specified speed of not more than 7000 rpm,
-an output of 400 W or more but not more than 750 W (at 12 V),
-a flange diameter of 80 mm or more, but not more than 200 mm,
-a maximum length of not more than 335 mm, measured from the beginning of the shaft to its outer end,
-a housing length of not more than 265 mm, measured from the flange to the outer end,
-a steel sheet or die-cast aluminium basic housing consisting of not more than two parts, including electrical components and a flange with two or more but not more than 11 holes, whether or not with a sealing connection (groove with O-ring and protective grease or liquid seal interface),
-a stator with single T-tooth design and single coil winding with 9/6 or 12/10 or 12/8 topology and surface magnets,
-whether or not with electronic power steering controller,
-whether or not with pulley or coupling,
-whether or not with rotor position sensor
2.70 %8501.51.00.50Three phase AC synchronous brushless permanent magnet motor with: -an output of 500 W or more but not more than 700 W, -an external diameter of 129,7 mm or more but not more than 180,3 mm, -a rated speed of 16 000 rpm or more but not more than 17 000 rpm, -a weight of 2,5 kg or more but not more than 3,1 kg, and -with a pulley, for use in the manufacture of home appliance products
2.70 %8501.51.00.90Other
2.70 %Code / DescriptionThird-Country Duty
8501.52.20.10For use in civil aircraft
—8501.52.20.50AC synchronous servo motor with resolver and brake for a maximum speed of not more than 6 000rpm,With:
- an output of 340W or more but not more than 7,4kW,
- a flange of dimensions of not more than 180mm × 180mm, and
- a length from flange to extreme end of resolver of not more than 271mm
2.70 %8501.52.20.70Automotive-ready brushless permanently excited magnet synchronous alternating current motor with:
-a specified speed of not more than 7000 rpm,
-an output of 750 W or more but not more than 1,8 kW (at 12 V),
-a flange diameter of 80 mm or more, but not more than 200 mm,
-a maximum length of not more than 335 mm, measured from the beginning of the shaft to its outer end,
-a housing length of not more than 265 mm, measured from the flange to the outer end,
-a steel sheet or die-cast aluminium basic housing consisting of not more than two parts, including electrical components and a flange with two or more but not more than 11 holes, whether or not with a sealing connection (groove with O-ring and protective grease or liquid seal interface),
-a stator with single T-tooth design and single coil winding with 9/6 or 12/10 or 12/8 topology and surface magnets,
-whether or not with electronic power steering controller,
-whether or not with pulley or coupling,
-whether or not with rotor position sensor
2.70 %8501.52.20.80Electric permanent magnet synchronous motor with:
-an output power of 850 W,
-a rotor containing 8 poles generated by permanent magnets composed mainly with neodymium-iron-boron (per GB/T 13560 standard) enclosed in polyethylene cover,
-an outer diameter of motor magnet shaft end with dimension of 10,001 mm or more but no more than 10,007 mm,
-terminals located across the radius 26,2 mm and separated by an angle 30,0°,
-a housing made of ADC12 or AC46000 aluminium alloy die casting with composition of aluminium-silicon-copper (per JIS H5302 or EN1706 standard) and anodized coating (per ASTM B580 type E standard),
-a back electromotive force constant (Ke) of 0,04009 V-sec/rad or more but no more than 0,04431 V-sec/rad,
-a back electromotive force harmonic order - 5th of no more than 0,36 % (of fundamental) and 7th of no more than 0,24 % (of fundamental),
-a cogging torque of no more than 20 mNm,
-a friction torque in ambient temperature of no more than 26,5 mNm,
-a maximum temperature of motor operation of no more than 200 °C
2.70 %8501.52.20.89Other
2.70 %8501.52.30.10For use in civil aircraft
—8501.52.30.90Other
2.70 %8501.52.90.10For use in civil aircraft
—8501.52.90.90Other
2.70 %Code / DescriptionThird-Country Duty
8501.53.50.10Electric drive for motor vehicles, with an output of not more than 315 kW: - with an AC or DC motor with or without transmission, - with or without power electronics
2.70 %8501.53.50.20AC traction motor of the Interior Permanent Magnet Synchronous Motor (IPMSM) type with: -a torque output of 200 Nm or more, but not more than 400 Nm, -a power output of 50 kW or more, but not more than 200 kW , -a rotation speed of no more than 15 000 rpm, for use in the manufacture of electric vehicles
2.70 %8501.53.50.30Permanent magnet synchronous traction motor, with: -a continuous power of 110 kW or more but not more than 180 kW, -a liquid cooled system, -a total length of 500 mm or more but not more than 650 mm, -a total width of 600 mm or more but not more than 700 mm, -a total height of 550 mm or more but not more than 650 mm, -weighing of not more than 350 kg, -3 suspension points
2.70 %8501.53.50.40Permanent magnet traction AC motor, with: -a continuous power of 110 kW or more but not more than 150 kW, -a liquid cooled system, -a total length of 460 mm or more but not more than 590 mm, -a total width of 450 mm or more but not more than 580 mm, -a total height of 490 mm or more but not more than 590 mm, -a weight of not more than 310 kg, -4 mounting points
2.70 %8501.53.50.50Asynchronous traction motor, with:
-a continuous power of 140 kW or more but not more than 180 kW,
-a liquid cooled system,
-a total length of 580 mm or more but not more than 730 mm,
-a total width of 550 mm or more but not more than 670 mm,
-a total height of 510 mm or more but not more than 630 mm,
-with a weight of not more than 390 kg,
2.70 %8501.53.50.90Other
2.70 %8501.53.81.10Of an output not exceeding|150|kW, for use in civil aircraft
—8501.53.81.20Of an output exceeding|150|kW, for use in certain types of aircraft
2.70 %8501.53.81.90Other
2.70 %8501.53.94.10For use in certain types of aircraft
2.70 %8501.53.94.90Other
2.70 %8501.53.99.10For use in certain types of aircrafts
2.70 %8501.53.99.90Other
2.70 %Code / DescriptionThird-Country Duty
8501.61.20.10For use in civil aircraft
—8501.61.20.90Other
2.70 %8501.61.80.10For use in civil aircraft
—8501.61.80.99Other
2.70 %Code / DescriptionThird-Country Duty
8501.62.00.10For use in civil aircraft
—8501.62.00.40AC, 3-phase generator, with: -a continuous power of 147 kVA or more but not more than 222 kVA, -a continuous torque of 650 Nm or more but not more than 900 Nm, -a maximum working speed of 2700 revolutions per minute (rpm), -a liquid cooled system, -a length of 100 mm or more but not more than 200 mm, -a width of 550 mm or more but not more than 650 mm, -a height of 550 mm or more but not more than 650 mm, -weighing of not more than 150 kg
2.70 %8501.62.00.98Other
2.70 %Code / DescriptionThird-Country Duty
8501.64.00.00Of an output exceeding 750|kVA
2.70 %Code / DescriptionThird-Country Duty
8501.71.00.00Of an output not exceeding 50|W
2.70 %Code / DescriptionThird-Country Duty
8501.72.00.00Of an output exceeding 50|W
2.70 %Code / DescriptionThird-Country Duty
8501.80.00.00Photovoltaic AC generators
2.70 %Source: EU TARIC database (European Commission). For informational purposes only. Consult the official TARIC and a licensed customs broker for binding rates.