Subheading 8501.31
EU TARICDC motors nesoi, of an output exceeding 37.5 W but not exceeding 74.6 W
17 TARIC codes
| TARIC Code | Description | Third-Country Duty |
|---|---|---|
| 8501.31.00.10 | Motors of an output exceeding|735|W, DC generators, for use in civil aircraft | — |
| 8501.31.00.20 | For use in certain types of aircraft | 2.70 % |
| 8501.31.00.45 | DC motors, brushless, with: -|an external diameter of 90|mm or more, but not more than 110|mm, -|a rated speed of not more than 3|680|rpm, -|an output of 600|W or more but not more than 740|W at 2|300|rpm and at 80|°C, -|a supply voltage of 12|V, -|a torque of not more than 5,67|Nm, -|a rotor position sensor, -|an electronic star-point relay, and -|for use with an electric power steering control module | 2.70 % |
| 8501.31.00.47 | Motor for automotive electric seat adjustment applications: -with a shaft output on both motor sides, -consisting of a permanently excited DC motor, -whether brushed or brushless, -whether or not with electronic control unit, -whether or not with Hall Effect Sensor, -with a nominal voltage of 8 V or more but not more than 16 V, -with a rated output mechanical power not exceeding 120 W, and -with a specified temperature range from -40 °C to 160 °C, for use in the manufacture of automotive components for car's seats | 2.70 % |
| 8501.31.00.48 | Brushless DC electric motors: -with a rated power of 240 W or more, but not more than 260 W, -with a voltage of 36 V or higher, but not higher than 52 V -with a torque of 20 Nm or more, but not more than 140 Nm, -with a housing made of aluminum, aluminum alloy or plastic, -with or without a built-in controller, -with a communication function in the LIN or UART interface, -weighing 1,5 kg or more, but not more than 5,0 kg, -adapted for mounting in a bicycle frame for use in the manufacture of e-bikes | 2.70 % |
| 8501.31.00.49 | Brushless DC electric motors: - with a rated power of 240 W or more, but not more than 260 W, - with a voltage of 24 V or higher, but not higher than 52 V, - with a torque of 30 Nm or more, but not more than 62 Nm, - with a LIN, UART or CAN communication interface, - with an internal planetary gearbox with fixed or variable ratio or direct drive, - with a housing made of aluminum or aluminium alloy, - with a weight of 1,5kg or more, but not more than 6kg, - adapted for mounting in the front or rear bicycle wheel, for use in the manufacture of e-bikes | 2.70 % |
| 8501.31.00.50 | DC motors, brushless, with:| -|an external diameter of 80|mm or more, but not more than 200|mm, -|a supply voltage of 4|V or more, but not more than 16|V, -|an output at 20|°C of 200|W or more, but not more than 750|W, -|a torque at 20|°C of 2,00|Nm or more, but not more than 7,00|Nm, -|a rated speed at 20|°C of 600|rpm or more, but not more than 3|100|rpm, -|with or without a pulley, - with or without an electronic power steering sensor/controller | 2.70 % |
| 8501.31.00.52 | Electric brushless direct current motor finished with biocompatible materials such as stainless steel according to specification 17-4 PH or type 303, 316L, 400 with: -a three-phase winding, -an output power not exceeding 280 W, -a length with gearhead of 116,1 mm or more but not more than 117,2 mm, -an external diameter of 13,86 mm or more but no more than 13,92 mm, -a maximum torque of motor with gearhead 246,6 mNm in 25℃, -a no-load radial speed of motor with gearhead with 9 900 rpm, at 24V in 25°C, -a weight of motor with gearhead of 70,5 g or more but not more than 71,5 g, a resistance to peak temperature of 140°C or more (non-operating), a maximal air leak between shaft and shaft seals of 15 Pa/s at given 2 Bars of pressure, -14 functional pins for power and control purpose, -a flexible printed circuit with length of 245 mm but no longer than 255 mm with mounted 8 pin male connector for use in the manufacture of medical devices with right-left rotation and oscillation function | 2.70 % |
| 8501.31.00.54 | Brushless DC electric motor, with: -a rated voltage of 310 V, -a rated power of 350 W or more but not more than 368 W, -an input power of 500 W or more but not more than 550 W, -output power of 350 W or more but not more than 400 W, -an external diameter without bracket connector and pulley of 143,2 mm or more but not more than 143,8 mm, -a rated speed of 16300 rpm or more but not more than 16500 rpm, -a weight of 2,33 kg or more but not more than 2,40 kg, -a pulley | 2.70 % |
| 8501.31.00.55 | DC motor with or without commutator, for driving hand-held power tools, lawn mowers or home appliances, with: -an external diameter of 24,2 mm or more, but not more than 140 mm, -a rated speed of 3300 rpm or more, but not more than 26200 rpm, -a rated supply voltage of 3,6 V or more, but not more than 230 V, -an output power of more than 37,5 W , but not more than 2400 W, -a free load current of not more than 20,1 A, -a maximum efficiency of 50 % or more, | 2.70 % |
| 8501.31.00.56 | DC motor, brushless, integrated with an Electronic Control Unit (ECU), defined as a Power Pack with: -a safety feature and mechanism designed for prevention of critical hazards like self-steer by single failure, -a CAN-communication interface, -an external sensor interface, -operating temperature range of -40℃ to 95℃ or broader, -compliance with standard IP6K9K for water and dustproofness, -supply voltage of 9 V or more, but not more than 16 V, -rated power output of 500 W or more, but not higher than 750 W, -rated torque of 3 Nm or more, but not more than 6 Nm, -length of 150 mm or more, but not more than 250 mm, -width of 100 mm or more, but not more than 150 mm, -height of 80 mm or more, but not more than 120 mm | 2.70 % |
| 8501.31.00.57 | Brushless DC electric motor with LCD control indicator and/or control unit with buttons: -with an output power of 200 W or more, but not more than 700 W, -with a supply voltage of 30 V or more, but not more than 60 V, -with a torque of 30 Nm or more, but not more than 200 Nm, -with a height of 117 mm or more, but not more than 146 mm, -with a length of 117 mm or more, but not more than 223 mm, -with a width of 135 mm or more, but not more than 190 mm, -with a weight of 2 kg or more but not more than 5 kg, -designed to be mounted in a frame, front or rear bicycle wheel, -equipped with sockets, at least for cable connection with LCD control indicator, for use in the manufacture of electric bicycles | 2.70 % |
| 8501.31.00.58 | Permanently excited DC motor with: -an external diameter of 27 mm or more but not more than 90 mm, including mounting flange, -a rated speed of not more than 25 000 rpm, -an output of 45 W or more but not more than 400 W, and -a supply voltage of 9 V or more but not more than 50 V, -whether or not a multiple-phase winding, -whether or not with a drive disc, -whether or not with a crankcase, -whether or not with a fan, -whether or not with a cap assembly, -whether or not with a sun gear, -whether or not with a speed and rotational direction encoder, -whether or not with or without a speed or rotational direction sensor of resolver type or Hall effect type, -whether or not with a mounting flange for use in the manufacture of air suspension seats in tractors, earthmoving machines and forklifts or for use in the manufacture of actuators for height-adjustable furniture | 2.70 % |
| 8501.31.00.63 | Ready for installation in vehicles or equipment of headings 8432 and 8433, brushless and permanently excited direct current motor with: - a specified speed of not more than 6000rpm, - a minimum output of 400W, but not more than 1,3kW (at 12 V), or with a minimum output of 750W but not more than 1,55kW (at 36 V), - a flange diameter of 85mm or more but not more than 200mm, - a maximum length of 335mm, measured from the beginning of the shaft to the outer ending, - a housing length of not more than 265mm, measured from the flange to the outer ending, - a maximum of two-piece (basic housing including electric components and flange with minimum 2 and maximum 11 bore holes) aluminium diecast or sheet steel housing whether or not with a sealing compound (groove with an O-ring and grease), - a stator with single T-tooth design and single coil windings in 9/6 or 12/8 or 12/10 topology, and - surface magnets, - whether or not with electronic power steering controller, - whether or not with pulley or coupling, - whether or not with rotor position sensor | 2.70 % |
| 8501.31.00.68 | Camshaft actuator for controlling the timing of valve opening by using electromotor in a continuous variable valve timing system of an internal combustion piston engine, of: -a length of 110 mm or more but not more than 140 mm, -a width of 90 mm or more but not more than 130 mm, -a height of 80 mm or more but not more than 110 mm for use in the manufacture of engines of motor vehicles | 2.70 % |
| 8501.31.00.85 | Power transmission device for controlling the output of exhaust gas turbochargers, consisting of: - a DC motor of an output not exceeding 600 W, - for usage with a supply voltage of 8 V or more but no more than 48 V, - with motor connection (plug-in connection), - whether or not with position sensor, - whether or not with integrated control and power electronics, - whether or not with spring mechanism for resetting the lever, - built in a housing with reduction gear and lever attached to the motor drive shaft, or - built in a housing with threads integrated into the rotor of the motor for linear movement of the integrated control rod | 2.70 % |
| 8501.31.00.99 | Other | 2.70 % |
Source: EU TARIC database (European Commission). For informational purposes only. Consult the official TARIC and a licensed customs broker for binding rates.