Heading 39.01
EU TARICPolymers of ethylene, in primary forms
5 subheadings · 31 TARIC codes
Code / DescriptionThird-Country Duty
3901.10.10.20High flow linear low density polyethylene-1-butene / LLDPE (CAS RN 25087-34-7) in form of powder, with -a melt flow rate (MFR 190 °C/2,16 kg) of 16g/10min or more, but not more than 24 g/10 min and -a density (ASTM D 1505) of 0,922 g/cm³ or more, but not more than 0,926 g/cm³ and -a vicat softening temperature of min. 94 °C
6.50 %3901.10.10.50Copolymer of ethylene and 1-butene (CAS RN 25087-34-7) with: -a density (ASTM D 1505) of 0,924 g/cm³ or more but not more than 0,928 g/cm³, -a melt flow rate (190 °C/2,16 kg) of 48 g/10 min or more but not more than 52 g/10 min, and -a peak melting temperature of 120 °C or more but not more than 124 °C
6.50 %3901.10.10.60Copolymer of ethylene and 1-butene (CAS RN 25087-34-7) with: -a density (ASTM D 1505) of 0,922 g/cm³ or more but not more than 0,926 g/cm³ and -a melt flow rate (190 °C/2,16 kg) of 18 g/10 min or more but not more than 22 g/10 min
6.50 %3901.10.10.90Other
6.50 %3901.10.90.30Polyethylene granules, containing by weight 10|% or more but not more than 25|% of copper
6.50 %3901.10.90.90Other
6.50 %Code / DescriptionThird-Country Duty
3901.20.10.00Polyethylene in one of the forms mentioned in note|6(b) to this chapter, of a specific gravity of 0,958|or more at 23|°C, containing:
-|50|mg/kg or less of aluminium,
-|2|mg/kg or less of calcium,
-|2|mg/kg or less of chromium,
-|2|mg/kg or less of iron,
-|2|mg/kg or less of nickel,
-|2|mg/kg or less of titanium and
-|8|mg/kg or less of vanadium,
for the manufacture of chlorosulphonated polyethylene
—3901.20.90.00Other
6.50 %Code / DescriptionThird-Country Duty
3901.30.00.10For cavity filling, for use in certain types of aircraft
6.50 %3901.30.00.20Copolymer of ethylene and vinyl acetate (CAS RN 24937-78-8)
-containing by weight 28 % or more but not more than 49 % of vinyl acetate,
-with a melt flow rate of less than 5g/10 min (190 °C/2.16 kg, ASTM D1238),
-in the form of pellets
6.50 %3901.30.00.30Terpolymer of ethylene, vinyl acetate and methacrylic acid (CAS RN 26375-31-5)
6.50 %3901.30.00.99Other
6.50 %Code / DescriptionThird-Country Duty
3901.40.00.10High flow linear low density polyethylene-1-butene / LLDPE (CAS RN 25087-34-7) in form of powder, with -a melt flow rate (MFR 190 °C/2,16 kg) of 16g/10 min or more, but not more than 24 g/10 min and -a density (ASTM D 1505) of 0,922 g/cm³ or more, but not more than 0,926 g/cm³ and -a vicat softening temperature of min. 94 °C
6.50 %3901.40.00.30Octene linear low-density polyethylene (LLDPE) produced by a Ziegler-Natta catalyst method|in the form of pellets with: -|more than 10|% but not more than 20|% by weight of copolymer, -|a melt flow rate (MFR 190°C/2,16|kg) of 0,7|g / 10|min or more|but not more than 0,9|g / 10|min, and -|a density (ASTM D4703) of 0,911 g/cm³ or more, but not more than 0,913 g/cm³ for use in the co-extrusion processing of films for flexible food packaging
6.50 %3901.40.00.50Copolymer of ethylene and 1-butene (CAS RN 25087-34-7) with: -a density (ASTM D 1505) of 0,924 g/cm³ or more but not more than 0,928 g/cm³, -a melt flow rate (190 °C/2,16 kg) of 48 g/10 min or more but not more than 52 g/10 min, and -a peak melting temperature of 120 °C or more but not more than 124 °C
6.50 %3901.40.00.60Copolymer of ethylene and 1-butene (CAS RN 25087-34-7) with: -a density (ASTM D 1505) of 0,922 g/cm³ or more but not more than 0,926 g/cm³ and -a melt flow rate (190 °C/2,16 kg) of 18 g/10 min or more but not more than 22 g/10 min
6.50 %3901.40.00.90Other
6.50 %Code / DescriptionThird-Country Duty
3901.90.30.00Ionomer resin consisting of a salt of a terpolymer of ethylene with isobutyl acrylate and methacrylic acid; A-B-A block copolymer of polystyrene, ethylene-butylene copolymer and polystyrene, containing by weight 35|% or less of styrene, in one of the forms mentioned in note|6(b) to this chapter
0.00 %3901.90.80.10For cavity filling, for use in certain types of aircraft
6.50 %3901.90.80.53Copolymer of ethylene and acrylic acid (CAS RN 9010-77-9) with -|an acrylic acid content of 18,5|% or more but not more than 49,5|% by weight (ASTM D4094), and -|a melt flow rate of 10g/10|min (MFR 125|°C/2.16|kg, ASTM D1238) or more
6.50 %3901.90.80.55Zinc or sodium salt of an ethylene and acrylic acid copolymer, with:
-|an acrylic acid content of 6|% or more but not more than 50|% by weight, and
-|a melt flow rate of 1g/10|min or more at 190|°C/2.16|kg (measured using ASTM D1238)
6.50 %3901.90.80.67Copolymer made exclusively from ethylene and methacrylic acid monomers in which the methacrylic acid content is 11|% by weight|or more
6.50 %3901.90.80.73Mixture containing by weight
-|80|% or more, but not more than 94|% of chlorinated polyethylene (CAS RN 64754-90-1) and
-|6|% or more, but not more than 20|% of styrene-acrylic copolymer (CAS RN 27136-15-8)
6.50 %3901.90.80.75Terpolymer of ethylene, isobutyl acrylate and methacrylic acid (CAS RN 37433-35-5), in the form of pellets
6.50 %3901.90.80.85Terpolymer of ethylene, n-butyl acrylate and carbon monoxide (CAS RN 61843-70-7) in the form of pellets
6.50 %3901.90.80.91Ionomer resin consisting of a salt of a copolymer of ethylene with methacrylic acid
6.50 %3901.90.80.92Chlorosulphonated polyethylene
6.50 %3901.90.80.93Copolymer of ethylene, vinyl acetate and carbon monoxide, for use as a plasticizer in the manufacture of roof sheets
6.50 %3901.90.80.94Mixtures of A-B block copolymer of polystyrene and ethylene-butylene copolymer and A-B-A block copolymer of polystyrene, ethylene-butylene copolymer and polystyrene, containing by weight not more than 35|% of styrene
6.50 %3901.90.80.97Chlorinated polyethylene, in the form of powder
6.50 %3901.90.80.99Other
6.50 %Source: EU TARIC database (European Commission). For informational purposes only. Consult the official TARIC and a licensed customs broker for binding rates.